Trailer Hub that Fits 1 inch or 1-1/6 inch Diameter Spindle
Question:
Getting ready to replace torsion axle that has metric dimensions. Do they make a race/bearing set with metric race OD and SAE US dimensions on spindle for the hub? Id say 1inch or 1 1/16 inch spindle.
asked by: Leo
Expert Reply:
We have hubs that are designed to fit spindle diameters that you mentioned of 1 inch and 1-1/6 inch. If you have a straight spindle with a 1 inch diameter you'd have a BT8 spindle and the hub part # 8-258BTUC1 that you referenced would fit. If you have a spindle with a straight diameter of 1-1/6 inch then you'd have a BTR spindle and would want a # 8-258-50UC1. The diameter of the spindle where the seal would ride on either would be 1.25 inch.
If you can verify your spindle dimensions and they match either hub I mentioned then either would be a match.
Products Referenced in This Question
Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Standard
- L44649
- L44649
- For 2200 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Search Results: galvanized leaf springs
- Video: CE Smith Carpeted Boat Trailer Bunk Boards Installation
- Video: CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE10001G Review
- Search Results: akihub~440~2~g~1k
- Search Results: sw1000
- Search Results: 165686
- Search Results: leaf springs
- Search Results: keel rollers
- Search Results: leaf spring
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Shop: Trailer Spindle Nut 1"
- Shop: Washer For 1" Spindle
- Shop: CE Smith Trailer Axle Beam with Standard Spindles - Galvanized - 57-1/2" Long - 1.8K
- Shop: Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs
- Shop: CE Smith Replacement U-Bolt w/ Nuts for 1-3/4" Round Axles - 3/8" Diameter - Galvanized
- Shop: CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles - 3-3/8" Long U-Bolts - Zinc
- Q&A: Can a Three Leaf Spring Stack Be Used To Replace a Two Leaf Spring Stack
- Q&A: Replacement Slipper Springs for 1982 Cox Boat Trailer
- Q&A: Is it Okay to Have Different Size Tires on a Trailer
- Q&A: Can Bearings for a 1-1/16 Inch Spindle Replace Bearings for a 1 Inch Spindle Using Same Hub
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Q&A: Spindle Nut Size For EZ Lube Axles
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Q&A: Replacement Hydraulic Disc Brake Actuator To Replace Tie Down 70lc
- Video: Review of Dexter Trailer Hubs and Drums - Hub - 34822545BX
- Video: DeeZee Aluminum Headache Rack Review
- Shop: Tailgate
- Shop: Headache Rack
- Shop: Trailer Wiring
- Shop: Trailer Hitch