Upgraded Replacement Pin Recommendation for Curt Friction Sway Control # 17200
Question:
I have lost one of my pins while towing. This is concerning in the extreme and a worry I had from beginning about these pins. Do you have a recommendation of a better replacement that could lock on a little better? Or is a trip to Lowes or Ace my best bet for just a cotter pin that pinches on good?
asked by: Chris C
Expert Reply:
For a replacement pin for the Curt Friction Sway Control part # 17200 you can use our part number # 55515. This would be a step up from what came with your kit as it has two indentions that the pin would have to overcome to fall off unlike what came with the # 17200 which only had one. If you wanted a twist style from your local hardware store that would work well too.
Product Page this Question was Asked From
Curt Friction Sway Control for Weight Distribution Systems
- Accessories and Parts
- Weight Distribution Hitch
- Sway Control Parts
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: RV Bluetooth Portable Speaker - 2 USB Ports - 20W - Black
- Video: Review of Curt Weight Distribution Hitch Parts - Replacement Retainer Clip Hardware - 17109
- Q&A: How to Remove and Reinstall the Retaining Clips on a Curt Round Bar Weight Distribution System
- Shop: Curt Friction Sway Control for Weight Distribution Systems
- Shop: Curt Spring Bar Retainer Package for Round Bar Style Weight Distribution
- Shop: Replacement Pin for Friction-Style Sway Control Systems - Qty 1
- Shop: Replacement Clips for Curt Friction Sway Control
- Q&A: Would Too Much Grease in a Trailer Hub Cause the Grease Caps to Fall Off
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5-1/2- Pre-Greased
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Search Results: bearing buddy
- Video: Bearing Repacking and Grease Seals Installation
- Shop: Vehicle Tow Bar Brake System
- Q&A: Does Bearing Buddy Replace Trailer Axle Dust Cap
- Q&A: Does the Rubber Cap on a Dust Cover Have to be Removed to Fill EZ Lube Trailer Axles with Grease
- Q&A: Can LubriMatic White Lithium Grease be Safely Mixed with Existing Grease on Trailer Bearings
- Q&A: How Tight Should Curt Friction Sway Control # 17200 Be Adjusted
- Video: Review of CURT Replacement Clips Friction Sway Control For Weight Distribution - C72NR
- Shop: Brake Controller
- Search Results: shackle strap
- Search Results: cotter pin
- Video: Review of Fastway - Weight Distribution - FA94-02-1059
- Q&A: Needing Highest Ply-Rated 13 Inch Trailer Tires
- Video: Inspecting and Packing Trailer Bearings with Grease Demonstration
- Search Results: axle washer
- Search Results: d washer
- Search Results: d ring washer
- Search Results: washer
- Video: Packing Trailer Bearing Demonstration