L68810 Bearing Recommendation for a L68149 Bearing
Question:
I ordered a bearing kit where the outers were L44649 and are correct. The inners were L68149 bearing. ID for spindle is correct. OD of race L68111 measures 2.362inch according to my mic. I need a race that will fit in a 2.327inch bore according to my snap gauge using the L68149 bearing.
asked by: Tim M
Expert Reply:
I have a race that will work for you. You would want a Redline Race # L68110. The outer dimensions of this race are 2.327 inches, and this will work with a # L68149 bearing.
Check out the video I attached that shows the outer dimension of the # L68110 and that it works with the # L68149 bearing.
Products Referenced in This Question
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 2.327 Inch O.D.
- Bearing L68149
- Race L68110
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Replacement Race - L68110
- Shop: Replacement Race for L68149 Bearing
- Shop: Replacement Trailer Hub Bearing - L68149
- Shop: Demco Hydraulic Drum Brake Assembly - Free Backing - Galvanized - 10" - Right Hand - 3,500 lbs
- Shop: Replacement Race for L44643 and L44649 Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Search Results: 44610
- Search Results: brake hardware
- Search Results: 68110
- Q&A: Grease Seal for Spindle that is 1.68 Inches in Diameter
- Q&A: ST205/75r14 Trailer Tire Vs. a ST205/75D14
- Q&A: What is the Difference Between Over 80 inch and Under 80 inch Trailer Tail Lights
- Search Results: trailer wiring grommet
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Search Results: outlet
- Search Results: l68111
- Search Results: 68111
- Q&A: Proper Way to Tighten Trailer Spindle of Castle Nut
- Q&A: How to Remove Bearing Races on a Trailer Hub
- Q&A: Information Needed to Replace a Dexter Torsion Axle
- Q&A: Do I Need to Replace #84 Spindle With Rust On Surface and What Bearing Kit Do I Need
- Video: Remove, Inspect, and Reinstall Trailer Bearings, Race, and Seals Demonstration
- Video: TryRyde Tang Type Replacement Spindle Washer Review