Manual Dolly Recommendation for Moving Trailer that Weighs 1,500 lb

Question

Question:

Hi, Would a 5x8 dump trailer, weight 1500 lbs,. be too heavy for the MT70881?

asked by: Larry

0

Expert Reply:

We have one trailer dolly that will work with a total trailer weight of 1,500 lbs. For that you'd want the RackEm dolly part # RA20 which has a tongue weight capacity of 500 lbs which would easily be compatible with a 1,500 lb trailer like what you have.

expert reply by: Jameson C

0

Answer 1

I may have a solution for you, but we don't carry any true pneumatic wheels for swiveling trailer jacks-they're typically only going to be used on heavy duty trailer jacks and dollies like the Trailer Valet #STC-V211. With that said, you may…

view full answer...

Answer 2

The tongue weight and total weight will be important factors in choosing the correct trailer dolly, but I'll give you some general options that would cover different possibilities. If the total weight of the trailer is 10k-lbs or less, and the…

view full answer...

Answer 3

Actually the Rack'em Trailer Dolly #RA20 will work well with a trailer that has a 2 inch coupler. When using a tow dolly the tongue weight alone of the trailer will keep the coupler attached to it. You do not have to use the exact same size hitch…

view full answer...

Answer 4

It appears your Load Rite PWC trailer came with wheels and tires like the Kenda 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel #AM30590. We do have the Taskmaster 4.80R12 Radial Trailer Tire #TT48012C which is the same size so you know it…

view full answer...

Answer 5

You can't get a larger ball for the Rack'Em Trailer Dolly part #RA20, but the good news is that you don't need one to use it with a trailer trailer that has a coupler designed for a 2-5/16 inch hitch ball. The reason for this is that the…

view full answer...

Answer 6

The Trimax Puck Lock for Trailer Door Hasps #TMX96RR cannot be keyed alike. While disappointing I'm sure, there is another option to consider, which is to order a quantity of two of the Trimax Puck Locks for Trailer Door Hasps #TMX73FR. The…

view full answer...

Answer 7

I was able to run out to our warehouse and measure the projection of both the Draw-Tite DT45511 and Curt #C15460 trailer hitches you're asking about. I've attached some photos showing the dimensions I measured for you to check out! I measured…

view full answer...

Answer 8

First you would need an engine oil cooler kit. I recommend #D15502 because it comes with multiple thread types and has the proper O-ring size for a V-6 Toyota motor. The sandwich adapter included is thermostatic so a separate thermostat is not…

view full answer...

Manual Dolly Recommendation for Moving Trailer that Weighs 1,500 lb

Product Page this Question was Asked From

Continue Researching