Solution for 2007 Keystone Springdale 249 5th Wheel Needing Replacement Spindle
Question:
I lost a wheel bearing on the way home from yellowstone, I am looking for a whole hub/bearing replacement and the spindle
asked by: Chris
Expert Reply:
Since you need a new spindle too and installing spindles is a specialized job that usually costs more than just replacing an axle typically in your situation it's best to just replace the entire axle. This will be easier, more cost-effective and will give you all new axle components for both sides of the trailer.
You are going to need to measure your current axles in a few places to get the correct one as we don't have access to what your numbers reference.
You will need to measure from hub face to hub face and then from the spring seat centers. You will also need to know what bolt pattern you have on your current hubs. I attached a help article on how to determine this as well.
I also attached a link to a page with all of the axles we carry.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 3,500-lb E-Z Lube Axles - 10" - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs
- Shop: Mounting Hardware for 10" Brake Assemblies
- Shop: Hydraulic Trailer Brake Kit - Uni-Servo - Dacromet - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles - 10" Diameter - 5 on 4-1/2 - Galvanized
- Video: etrailer Trailer Brakes - Hydraulic Drum Brakes - AKFBBRK-35-D Review
- Shop: Dexter Hydraulic Brake Line with Fittings - 25" Long
- Shop: Kodiak Hydraulic Brake Hose - 3/16" Male Fittings w/ Stainless Flares - 1/8" ID - 1.5'
- Search Results: 8~247~50uc3
- Search Results: trailer brake hose
- Search Results: akfbbrk~35~d
- Q&A: Size of Adapter and Bleed Screw of part # KBPBB
- Q&A: Demco DM72VR Brake Bleeding Instructions and Hopkins 7 Pin to 6 Round Demco Actuator
- Search Results: ufp a 75
- Video: etrailer Hub And Drum Assembly Installation
- Video: etrailer Left and Right Hand Hydraulic Brake Kit Installation
- Search Results: brake hose
- Search Results: bearing buddy
- Q&A: Replacement Brake Assemblies and Hubs for Dual Axle Boat Trailer
- Q&A: How to Properly Adjust etrailer.com 3,500 lb Hydraulic Brake Kit for Installation
- Q&A: Can Regular Grease Trailer Hubs be Converted to Oil Bath Hubs
- Q&A: Grease or Oil Bath Hubs For a Boat Trailer
- Q&A: Will 3,500 lb Dexter Hub/Drum Fit 3,500 lb Axle that Had Oil Bath Setup
- Search Results: safety chains