Hanger Spacing when Using 12 Inch Long Slipper Spring Equalizer E4541-Z
Question:
what is the recommended hanger spacing for a tandem suspension using the E4541 equalizer?
asked by: Jason
0
Expert Reply:
It really depends on the springs used. Take a look at the picture I have included that shows hanger spacing based on several different springs. This will be a good guide to reference when mocking up the suspension on your trailer. This is also found on suspension kit page for # APT6SE.
expert reply by:
Michael H
0
click to enlarge
Products Referenced in This Question
Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 12" Long Equalizers
- Trailer Leaf Spring Suspension
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- Tandem Axle
- etrailer
more information >
Product Page this Question was Asked From
Equalizer for 2" Wide Slipper Springs - 12" Long - 7/8" Center Hole - Zinc Plated
- Trailer Leaf Spring Suspension
- Standard Equalizer
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- 12 Inch Long
- Tandem Axle
- Triple Axle
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 12" Long Equalizers
- Shop: Wet Equalizer Bolt with Castle Nut and Grease Zerk - 4-11/16" Long - 7/8" Diameter
- Shop: Equalizer for 2" Wide Slipper Springs - 12" Long - 7/8" Center Hole
- Shop: Nylon Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 2" Long
- Shop: Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long
- Shop: Dexter Bronze Bushings - Qty 4
- Video: etrailer Trailer Suspension - Leaf Spring Suspension - APT6SE Review
- Video: Review of Dexter Trailer Leaf Spring Suspension - Standard Equalizer - HAP-205-03
- Video: Review of TruRyde Trailer Spindles - #42 EZ Lube Spindle - TRU39FR
- Video: Dexter Bronze Bushings Installation
- Video: Dexter Bronze Bushings Installation - 2019 CrossRoads Redwood Fifth Wheel
- Video: TruRyde Trailer Suspension - Leaf Spring Suspension - TREQ4541 Review
- Video: TruRyde Trailer Suspension TRFA71063 Review
- Q&A: Availability Of Replacement Spindle For 7000lb Dexter Trailer Axle Beam W/ 4" Drop 8327872
- Q&A: Replacement 4" Drop Spindle For Dexter 7,000LB E-Z Lube Trailer Axle
- Shop: Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 95" Long - 7,000 lbs
- Q&A: Why Is Trailer GVWR Higher Than Combined Capacity of its Axles
- Article: Slipper Spring Trailer Suspension System Review
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Recommended Lippert Equa-Flex Cushioned Equalizer for 35 Inch On Center 3,500 lb Axles
- Search Results: receiver
- Search Results: adjustable trailer hitches
- Search Results: adjustable trailer coupler
- Search Results: 7 way connector
- Search Results: trailer emergency brake
- Search Results: trailer deck screws
- Search Results: optronics trailer light
- Q&A: Slipper Spring Hanger Positioning for 7,000 lb Tandem Axle
- Q&A: Spring Hanger Spacing Dimensions for a Tandem Axle Slipper Spring Suspension on a 14,0000 lb Trailer
- Q&A: Determining Spring Hanger Spacing for Tandem Axle Trailer Fabrication Project