Ball Mount for 2 inch Hitch that has 2 inch Drop and 15k Total Weight Capacity
Question:
the description states this hitch has a 1 1/4inch hole , do you offer it in a 1inch hole my ball is a 1inch dia. rated for 15,000 lbs Than you
asked by: Timothy G
Helpful Expert Reply:
Ball mounts with 1 inch diameter ball holes will have lower capacities like the Convert-A-Ball part # AMSC2 which has a 1-inch ball hole size but only has a capacity of 10,000 lb.
Only similar ball mount we have is the Curt Heavy Duty ball mount part # C45331 which as the same 2 inch drop like you need and a capacity of 15,000 lbs. It comes with a hitch ball mounted to it already which measures 2-5/16 inch. This would be your best option.
Products Referenced in This Question
Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Matte Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 10000 lbs GTW
- Class IV
- Shock Absorbing
- Convert-A-Ball
more information >
Curt Heavy Duty Forged Ball Mount with 2-5/16" Ball - 2" Drop - 15,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 2-5/16 Inch Ball
- One Ball
- Steel Ball
- Steel Shank - Matte Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 15000 lbs GTW
- Class IV
- CURT
more information >
Product Page this Question was Asked From
Curt Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 9-3/8" Long - 10,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1-1/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 10000 lbs GTW
- Class IV
- CURT
more information >
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Article: Trailer Maintenance Schedule
- Q&A: How to Bleed Electric Over Hydraulic Trailer Brakes
- Q&A: Correct Ball Mount for 19-3/4 Inch Receiver Height on 2021 Ford F150
- Q&A: Bearings and Seal Used for AL-KO 7290 Trailer Hubs for #99 Spindles
- Q&A: Replacement Rod and Nut for a Bulldog 12,000 lb Trailer Jack
- Q&A: Replacement Brakes for Dexter 4,400 Lb Axle with 023-478-00
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: Troubleshooting Surge Brakes Locking Up When Moving Forward
- Article: Rust Prevention
- Q&A: Replacement for Atwood Yoke Style A-Frame Coupler For 2 Inch Hitch Ball
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Calculating Portable Generator Power Needs
- Article: How to Choose the Right Trailer Hitch Class