Can a 1-Piece 9K/10K Dexter Hub and Drum be Replaced with a 2-Piece 9K/10K Hub and Drum
Question:
Can you not replace a 8-430 one piece hub assy with a 8-288 two piece hub assy?
asked by: Brad
Expert Reply:
I spoke directly with my technical contact over at Dexter. Basically you cannot replace an 8-430 hub with an 8-288 hub due to differences in the spindles that each of those hubs fit. If your axle was made after July of 2009 then you will need to use # 8-430-5UC3.
If it was made before July of 2009 you would instead use # 8-288-3UC1 with drum # 9-44-1 for non-ABS systems or # 9-44-3 for ABS systems.
Products Referenced in This Question
Dexter Trailer Idler Hub Assembly for 9,000-lb to 10,000-lb Axles - 8 on 6-1/2 - Oil Bath
- Trailer Hubs and Drums
- Hub
- Standard
- 387A
- 25580
- For 9000 lbs Axles
- For 10000 lbs Axles
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Dexter Trailer Brake Drum for 9,000-lb to 10,000-lb Axles - 12-1/4" - 8 on 6-1/2 - Non-ABS
- Accessories and Parts
- Trailer Hubs and Drums
- Drums
- 12-1/4 x 3-3/8 Inch
- 8 on 6-1/2 Inch
- Dexter
more information >
Trailer Brake Drum for Dexter Trailer Hub Assembly - 9,000 - 10,000-lb Axles - ABS - 8 on 6-1/2
- Accessories and Parts
- Trailer Hubs and Drums
- Drums
- 12-1/4 x 3-3/8 Inch
- 8 on 6-1/2 Inch
- Dexter
more information >
Product Page this Question was Asked From
Dexter Trailer Hub Drum Assembly - 9K to 10K - 8 on 6.5 - Oil Bath - Non-ABS Drum - After July 2009
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Oil Bath
- 387A
- 25580
- For 9000 lbs Axles
- For 10000 lbs Axles
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: H-Channel for Enclosed Trailer - 93-1/2" Long x 2" Tall x 1-1/8" Deep - Aluminum
- Shop: Corner Screw Cove Trim for Enclosed Trailer - 1-1/2" Tall x 1-1/2" Deep - Aluminum
- Search Results: fender light
- Search Results: ts10037b
- Search Results: etrack
- Shop: CargoSmart Horizontal or Vertical X Track - Matte Black - Steel - 667 lbs - 5' Long
- Shop: etrailer Electric Trailer Brakes w/ Dust Shields - Self-Adjusting - 12-1/4" - Left/Right - 10K
- Search Results: e~track
- Shop: Trailer Hub Wheel Stud, Drive-In, 9/16" x 2" - Qty 1
- Shop: LED Trailer Tail Light w/ Flange - Stop, Turn, Tail - Submersible - 6 Diodes - Oval - Red Lens
- Shop: LED Trailer Fender Clearance Light - Submersible - 2 Diodes - Amber/Red - Driver or Passenger Side
- Shop: RV Covers
- Search Results: xtrack
- Search Results: xtrack
- Search Results: weighsafe
- Q&A: Troubleshooting 2014 Ford F-150 7-Way with No 12V Trailer Power
- Shop: Gooseneck Hitch
- Video: Unitized Oil Seal Review
- Video: Dexter Axle Trailer Hubs and Drums - Hub with Integrated Drum - 8-430-5UC3 Review
- Q&A: Are all Trailer Brake Assembly Magnets the Same
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Video: Race Ramps Trak-Jax Ramps Review
- Video: etrailer Self-Adjusting Electric Trailer Brake Kit Review
- Q&A: How to Check for a Bent Trailer Axle Spindle
- Q&A: Trouble Removing Spindle Nut On Dexter 10K Axle
- Q&A: Replacement Axle Nut And Tang Washer For A Dexter 10K Axle Made In 1999
- Article: Trailer Wiring Diagrams
- Q&A: Correct Replacement for Dexter 9-123 Drum
- Article: Testing Trailer Brake Magnets for Proper Function