Grommet and Wiring Harness Needed to Install Optronics Clearance Light part # STL75AB
Question:
I purchased a ST75AB marker light to replace my GLO-BRITE 1250 side marker light on our MH. I didnt read far ahead enough to realize I need the Grommet kit and wire plug kit to complete the install. Once I purchase these items, how does the light assembly attach to the MH? My existing light has two screws that hold it on and a small hole for the wire and light bulb. Thanks
asked by: Kevin R
Helpful Expert Reply:
The grommet needed to install the Optronics Clearance light part # STL75AB is the part # A70GB. This will require you have a hole where you want to mount the light that matches the dimensions of the light basically. Or you can also install the mounting bracket part # BK70BB. This attaches to the bottom of a mounting surface. The install harness you'd need is the part # A45PB too.
Products Referenced in This Question
3-Wire Pigtail for Optronics Trailer Lights - 3-Prong PL-3 Plug - 10" Lead
- Accessories and Parts
- Trailer Lights
- Wiring
- Plugs and Pigtails
- 10 Inch Long
- Three Wire
- Straight Pigtail
- Optronics
more information >
PVC Grommet for 6-1/2" Oval Trailer Tail Lights
- Accessories and Parts
- Trailer Lights
- Mounting Hardware
- Grommet
- 6-1/2 Inch Long
- Oval
- Optronics
more information >
Trailer Light Mounting Bracket for 6-1/2" Oval Trailer Lights, Steel - Black Powder Coat
- Accessories and Parts
- Trailer Lights
- Mounting Hardware
- 6-1/2 Inch Diameter
- Brackets
- Black
- Optronics
more information >
Product Page this Question was Asked From
Optronics LED Side Marker Light and Mid-Ship Turn Signal - Submersible - 9 Diodes - Amber Lens
- Trailer Lights
- Clearance Lights
- Side Marker
- Turn
- Oval
- Recessed Mount
- Submersible Lights
- LED Light
- 6-1/2L x 2W Inch
- Amber
- Optronics
more information >
Continue Researching
- Article: Double-Eye Trailer Suspension System Review
- Article: Slipper Spring Trailer Suspension System Review
- Q&A: How To Lift a Forest River R-Pod Trailer
- Q&A: Recommended Brake Controller for 2021 Tesla Model Y
- Q&A: Can I Install a 7 way With a Charge Line on my 2020 Tesla Model Y
- Q&A: Replacement Trailer Hub and Drum and Brakes for AL-KO 8490 Axle
- Q&A: Difference Between Single, Dual and Free Backing Servo Brake Assemblies
- Q&A: Cross Reference Chart for Kodiak Trailer Disk Brake Pads to Automotive Applications
- Q&A: Recommended Replacement Drop Leg for a Bulldog Tongue Jack
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Trailer Wiring Diagrams
- Article: Jump Starting Your Vehicle
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Can You Flat Tow a Ford Escape?