Recommended Tekonsha Prodigy P3 Electric Brake Controller # 90195 for 2009 Chevy Silverado
Question:
I have a 2009 Chevy Silverado 1500 that I bought used with a Hayes Genesis brake controller already intalled. I recently bought a travel trailer and cannot get this brake controller to operate correctly ... Im thinking it may be defective as it did have some duct tape wrapping ???. Anyway Im wanting to purchase a new Tekonsha P3 and am wanting to know whats needed to connect it. Id like to use the same connector that the Genesis is now plugged into. The connection looks factory installed, but Im having no luck in verifying this ... or whether it was wired specifically for the Genesis professionally. Id like to keep the Genesis and its wiring connector intact in case I need to backtrack or possibly use it in another vehicle if it checks out to be OK. So, my question is: How can I get the P3 connected to the current connector?
asked by: Richard B
Helpful Expert Reply:
For your 2009 Chevy Silverado 1500 the duct tape is definitely a warning sign that things may not be installed correctly. The Hayes Genesis controller # HA81790 has a connection that is not the same as the Tekonsha controllers. The pigtail # HA81789-HBC was hardwired to give you the appearance of a factory connection as that truck model in 2009 had the wiring present under the dash but without a connector.
My recommendation is to hardwire the Tekonsha harness in a similar way. The Tekonsha Prodigy P3 # 90195 will come with a harness like # 20127 so you can simply match color to color with your current harness when you replace it. The Prodigy P3 will be a substantial upgrade in function and control from the Hayes Genesis brake controller. I've attached a video to assist.
Even though there isn't an adapter for your Hayes harness to the Tekonsha harness, there won't be any issue with you using that harness and controller at another time or in another vehicle if the checks out okay. I've attached an article to help you with testing.
Products Referenced in This Question
Replacement Brake Control Plug-In Harness for Tekonsha and Draw-Tite Brake Controller 12" Long
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Universal
- Draw-Tite
more information >
Universal Wiring Adapter for Hayes Trailer Brake Controllers
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Universal
- Hayes
more information >
Product Page this Question was Asked From
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Wiring Diagrams
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Installing an Electric Brake Controller on 2007-2013 GM Full-Size Truck or 2007-Present GM SUV
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Does the Tekonsha P3 Trailer Brake Controller Turn Off or Stay On All the Time
- Q&A: How Does Brake Controller Install on Freightliner S2RV Chassis
- Q&A: Parts Needed to Add 7-Way & Brake Controller on 2023 Kia Sportage
- Q&A: Wiring Configuration for Tekonsha Prodigy P3 Trailer Brake Controller 90195
- Q&A: Comparison of Tekonsha Prodigy P3 and Primus IQ Brake Controllers
- Q&A: My Vehicle has a 4-Pin Trailer Plug, but Trailer has 7-Pin Trailer Plug