Can 2 Circuit Breakers Share the Same 12 Volt Power Wire
Question:
can two circuit breakers be fed from a common hot if one is a 15 amp and the other one a 30 Thanks
asked by: Dave
0
Expert Reply:
The problem you may run into when trying to power 2 circuit breakers from the same hot lead is that if there is a back feed problem on one circuit breaker it can affect the other one and cause some problems. It would be best to use a separate hot lead for each circuit breaker.
expert reply by:
Michael H
0
Product Page this Question was Asked From
Pollak Circuit Breaker - Cycling/Automatic Reset - 20 Amp - Straight Mount Bracket
- Accessories and Parts
- Wiring
- Circuit Breaker
- 20 Amp
- Pollak
more information >
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Wiring Diagrams
- Q&A: Modern Tire Size Equivalent for Replacing F78-15ST
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: Wiring For Circuit Breaker When Installing Brake Controller
- Q&A: Best Way To Attach Trailer Plug Bracket To A Trailer Hitch Without A Pre Welded Bracket
- Q&A: Wiring Configuration for Tekonsha Prodigy P3 Trailer Brake Controller 90195
- Q&A: What Gauge Wire Is Needed To Run Charge Line for Battery From Truck to Trailer
- Q&A: What Fuse Rating is Needed to Protect the 12 Volt Accessory Power Cirucit on a 7-Way Connector?
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Brake Controller Ground and Sharing Power Wire for an ETBC7 Hardwire Installation
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: REDARC Tow-Pro Liberty vs Tow-Pro Elite