Brake Controller and Trailer Wiring Recommendation for 2014 Audi Q7
Question:
How can I determine that my unit has the wiring from the front to rear? I am reading that all q7s have the wiring installed but not connected with out the factory tow package installed. Also, for brake control, what would be needed on the travel trailer... I am not sure what to look for on the trailer not yet purchased to see if everything will be compatible... Thanks for your advice!
asked by: Kevin R
Expert Reply:
You'll need to start with a 4-way first to install a 7-way since your vehicle doesn't sound like it has pre-wiring. If you go the rear of your vehicle and you don't see any trailer wiring connectors that's all you'd have to see to know you don't have it.
For the 4-way you would want the # 119250KIT.
Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way. If you are still considering trailers you'd just need to ask the person selling the trailer if there are brakes on it as they will know.
If you do have trailer brakes you would need the # ETBC7 instead of the # 37185 and a brake controller. This kit comes with everything needed to wire up the 7-way and install a brake controller.
For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup.
Products Referenced in This Question
ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Universal Fit
- 4 Flat
- Tekonsha
more information >
Adapter 4-Pole to 7-Pole and 4-Pole
- Trailer Wiring
- Wiring Adapters
- Multi-Function Adapter
- 4 Flat
- Plug and Lead
- 4 Flat
- 7 Round - Blade
- Hopkins
more information >
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class IV
- 750 lbs TW
- 7500 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Replacement Leaf Spring for Trailer with Dexter 4,400 lb Axle
- Q&A: Replacement Leaf Spring Replacing Dexter 072-078-00 For 4,400 lb Axle
- Q&A: How To Install HBA-CAM Hydrastar Adapter
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Maintenance Schedule
- Q&A: 5th Wheel Hitch and Rear Trailer Hitch for a 2005 Freightliner M2 106
- Q&A: Installation Instructions and Fascia Trimming for the Draw Tite Hitch part # 75950
- Q&A: Installing a Brake Controller on a 2000 Dodge Full Size Van
- Q&A: Brake Controller and Wiring Recommendation for a 2008 Ford Explorer Towing Trailer with 6-Way
- Article: How to Choose the Right Trailer Hitch Class
- Article: Rooftop Cargo Carriers
- Article: 2005-Current Volkswagen Touareg, Audi, or Porsche Cayenne
- Article: Trailer Wiring Diagrams
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch