Wiring a 1999 Jeep Grand Cherokee with Diodes to Flat Tow behind a Motor Home
Question:
can you give me any help on wireing my 99 grand cherokee? I just received my #38955 and dont want to get in the middle of the job and find out I need something else. thanks
asked by: Scott M
Expert Reply:
We actually have some helpful diagrams on the product page for the Tail Light Isolating Diode System, # 38955, as well as some videos and an FAQ article that I have linked for you. All of these items should be a big help.
When checking the wires on the vehicle to determine function, you will need a circuit tester like # PTW2993. You will probe the wires behind each taillight to find the turn signal, running light, and brake light wires. You will then wire them into the diodes according to the diagrams.
Your 1999 Jeep Grand Cherokee has separate turn signals. If the RV also has separate turn signals, and you wanted to retain the separate turn signals on the Jeep you will need 2 additional diodes, # RM-792, and follow the Separate RV to Separate Towed Vehicle diagram.
If the RV has separate turn signals, and you do not want to retain the separate signals on the Jeep when towing, you will not need additional diodes and you will follow the Separate RV to Combine Towed Vehicle diagram. You will need to use a converter, # RM-732.
If the RV has combined stop and turn signals, you will follow the Combine RV to Separate Towed Vehicle diagram and no additional diodes or converter should be needed.
![Michael H](https://images.etrailer.com/static/images/catg/people/324_tn.jpg)
Products Referenced in This Question
Roadmaster Brite-Lite Wiring Converter
- Flat Tow Wiring Harness
- Splices into Vehicle Wiring
- Tail Light Converter
- Universal
- Roadmaster
more information >
Roadmaster Hy-Power Diodes (Qty 2)
- Accessories and Parts
- Flat Tow Wiring Harness
- Diodes
- Roadmaster
more information >
Product Page this Question was Asked From
Tail Light Isolating Diode System with Wiring Harness
- Flat Tow Wiring Harness
- Splices into Vehicle Wiring
- Diode Kit
- Universal
- Tail Light Mount
- Hopkins
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Complete Flat Towing Setup for a 2024 Ford Maverick
- Q&A: Recommended Flat Towing Equipment For A 2022 Ford Maverick
- Article: Diode Installation Instructions for a Dinghy with Separate Tail Light Wiring
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Roadmaster Vehicle Specific Base Plates
- Article: Must-Have Flat Towing Components
- Q&A: Fuse Bypass for Flat Towing 2009 Honda CR-V Equipped with Hopkins Harness HM56300
- Article: Best Vehicles to Flat Tow Behind an RV
- Q&A: Recommended Parts to Flat Tow a 2024 Chevy Silverado 2500
- Article: Tow Bar Wiring: Which Wiring Kit is for You?
- Q&A: Will The Etrailer Class 3 Hitch e23ZR Interfere With Lift Gate Sensor On A 2023 Toyota RAV4
- Q&A: Parts Needed to Flat Tow a Jeep CJ-7 Behind an RV with Blue Ox Alpha Tow Bar
- Q&A: Landing Gear Lead Leg Repair Kit For Lippert 178653 Lead Leg