Can a 2008 Nissan Rogue be Used to Tow a 600 lb Honda Rubicon ATV on a Trailer
Question:
I am interested in a trailer hitch for my 2008 Nissan Rogue. I plan on towing a single trailer single ATV trailer? and haul my Honda Rubicon ATV 600lbs dry weight. I dont want to overdo my Rogue capacity, but want to ensure I get the proper hitch/tongue weight. What do you recommend for this application? I will not be towing anything else but this. Thanks,
asked by: Rob B
Expert Reply:
When I looked up the owner's manual for your 2008 Nissan Rogue it said on page 9-20 that your vehicle has a max trailer weight rating of 1,500 lbs with manual mode or 1,000 lbs without manual mode. Either way your max tongue weight rating is 150 lbs.
For a trailer hitch I recommend the etrailer.com Trailer Hitch Receiver # E98846 which is a Class III hitch with a 2" receiver and is rated for 3,500 lbs max trailer weight and 525 lb tongue weight. Since these are over the ratings for your Rogue you can tow to the full capacity of your Rogue. This means that as long as your trailer plus your Honda Rubicon ATV is under your weight ratings you are good to go.
Please note that you will also need a wiring harness like the T-One # 118480 and a hitch ball with ball mount like the what comes in the Ball Mount Kit # 989900 to complete your towing setup. I have attached a link to a helpful article on ball mounts so that you can be sure to get one with the proper rise/drop.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Product Page this Question was Asked From
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- etrailer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Article: My Trailer Hitch Doesn't Fit
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Install E-Track in 3 Easy Steps
- Q&A: Hitch Recommendation For 1996 Ford F-450 Cab and Chassis
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Wheel With 15 Diameter and 5 on 5-1/2 Bolt Pattern Needed for Antique Camper Trailer
- Q&A: Will the Hands Free Liftgate Still Work with a Trailer Hitch on a 2019 Nissan Rogue
- Article: How to Clean Weld Nuts for the Installation of a Trailer Hitch | etrailer.com
- Article: Trailer Hitch Installation Tips
- Q&A: Bolts Used to Install etrailer Trailer Hitch on 2017 Nissan Rogue
- Q&A: How Does a Hitch Being Installed Effect the Automatic Braking on a 2021 Nissan Rogue?
- Q&A: Trailer Hitch Recommendation for 2018 Nissan Rogue with Backup Camera and Handsfree Liftgate
- Article: How to Install a Trailer Hitch