Replacement 3,500 lb Axle with Electric Brakes and 5 on 5-1/2 Inch Bolt Pattern
Question:
I need to know if you have retro wheel hubs from a 9 to 4 1/2 bolt pattern. The inner bearing is 1 3/8 dia. # KL-68 149The outer bearing is 1 1/4# LM 57048 The spindle is stepped from axle 1 3/8dia. x 13/16 L / 1 1/4 dia. X 2 3/4 L. / thread end 1 dia X 7/8. Over all length is approx. 3 13/16
asked by: Tony
Expert Reply:
Unfortunately we don't have any hubs compatible with your axle and spindle. My recommendation is to replace your axle with the Trailer Axle w/ Electric Brakes - EZ-Lube # e43SR if you have a hub face to hub face measurement of 89 inches and a spring seat measurement of 74 inches center to center.
If you have a measurements of 95 inches and 80 inches then I recommend # 7359765-EB.
If neither of those measurements work, then you still have an option for your replacement. You can replace the axle and suspension using the Timbren Axle-Less Trailer Suspension System w Electric Brake Hubs - Straight Spindle - 3,500 lbs # A35RS545E. This system bolts directly to your frame and utilizes a 2 inch square bar (not included) that goes into the integrated holes of the assemblies. I've attached some videos to help further.
![Jason S](https://images.etrailer.com/static/images/catg/people/1044_tn.jpg)
Products Referenced in This Question
Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 5 on 4-1/2 Bolt Pattern - 95" - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- 80 Inch Long
- 95 Inch Long
- No Drop or Lift
- Dexter
more information >
Timbren Axle-Less Trailer Suspension w Electric Brakes - Standard Duty - No Drop - 5 on 4-1/2 - 3.5K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Trailer Axle w/ Electric Brakes - Easy Grease - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- etrailer
more information >
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- 25580
- 15123
- For 5200 lbs Axles
- For 6000 lbs Axles
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Recommendation for Dexter Axle 8-201 Hub Assembly on Older Horse Trailer
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Q&A: Does Dexter Trailer Hub and Drum Assembly Include E-Z Lube and Standard Grease Cap
- Q&A: Can a Hub with Outer Bearing 15123 and LM67048 Both Fit Same Spindle
- Article: Trailer Tire Sizing
- Q&A: Recommended Spare Hub/Drum For A Dexter D52 Axle
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Trailer Wiring Diagrams
- Q&A: Replacement For A Truryde RVD-H-65535 Hub
- Q&A: Can Regular Grease Trailer Hubs be Converted to Oil Bath Hubs
- Q&A: Dexter Brake Assembly Recommendations to Replace Part Number 023-357-00
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How to Measure a Trailer Axle