Recommendation for Brake Controller and Wiring on 2008 Chrysler Pacific

Question:

I want to hook up a break controller to the pacifica so i can pull a pop up camper. I have a 4 way plug, but need a 7. what is the best break controller and wiring to complete the hook up.

asked by: Douglas B

Expert Reply:

To get a 7-Way connector on the back of your 2008 Chrysler Pacifica you will need to use the Brake Controller Installation Kit, part # ETBC7. This kit will have a pre-wired 7 and 4-Way connector that will plug into your 4-Way connector on the vehicle and the remaining wires will need to be hardwired to the vehicle. I am including a link to detailed instructions on how to install the # ETBC7 kit on your vehicle.

Our most popular brake controller is the Tekonsha Prodigy P2 Brake Controller, part 90885. This brake controller is a proportional model which means it will apply power to the trailers brakes in proportion to the braking of your 2008 Chrysler Pacifica. I am including a link to the instructions on the Prodigy P2 brake controller and a video link of this brake controller and the # ETBC7 hardwire kit being installed on a 2010 Dodge Caravan. The vehicle is different but the installation will be the same.

expert reply by: Jeff D