Troubleshooting Trailer Wiring Harness that Stopped Working
Question:
I have a C56332 wire harness, that i purchased last year. It has stopped working. I have checked the vehicle power connections and they are good, i have checked the trailer and all lights work through the 4-way. However the 4-way on this product doesnt register any power.
asked by: Don K
Helpful Expert Reply:
What you will want to do is test the wires going into the box of the converter box for voltage with a circuit tester like the # PTW2993 to see if there is voltage going into the box when the taillight functions of your vehicle are applied, and then test the output side of the box to see if the current is making it through the converter. If not then the problem is that the converter box has shorted itself out and would need to be replaced.
Before you replace it you will want to inspect the wiring of your trailer to see if you can find anything that would cause the box to short out like corrosion or cut/exposed wiring. These boxes don't usually go out unless there is a short on the trailer that takes it out.
If there isn't input voltage for the converter then the problem is the wiring of the wiring kit. You will need to check to make sure it's making a solid connection to the correct circuits.
Products Referenced in This Question
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Article: Best Camper Jacks
- Q&A: How To Add a Fuel Tank To a Truck with 5th Wheel Hitch In Bed
- Q&A: Replacement LED Top Command Clearance Light With SAE-AP2-16 On Lens For 2018 Sunseeker Motorhome
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Trailer Grease Seal to Replace 127194TB
- Q&A: Wiring Diagram for Bargman 7-Way RV Style Connector # WG54006-043
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Article: How to Charge a Dump Trailer Battery
- Q&A: Recommended Lithium Battery Compatible Power Converter For Parallax 7355
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)