Replacement 7-Inch Hub/Drum for 1993 Coleman Cape Cod Pop-Up Tent Trailer
Question:
I am looking for replacement hub assemblys for a 1993 Coleman Cap Cod tent trailer that have a part# of 4716A1071. Do you have a match for this?
asked by: Walker S
Expert Reply:
My research indicates that the Coleman part 4716A1071 refers to a Dexter 7 x 2-inch hub/drum with a 5-lug pattern. We have several options in this size hub/drum that are displayed on the linked page; all have the 5-on-4-1/2 bolt pattern and all are rated for 2K axles. We have hubs for both standard spindles and also for EZ-Lube spindles.
All you need to do to select the correct replacement hub/drum is confirm which bearing is used in yours. It should be either # L44643 or # L44649 since all of our hubs use one or the other. Please refer to the linked photo to see where to look for the part number on your bearings. Do note that some hubs are specifically intended for hydraulic brakes; they are so noted on our site.
If the camper has electric brakes then I suggest the cost-effective etrailer hub # AKHD-545-2-1K if yours uses bearing # L44643, or part # AKHD-545-2-EZ-1K if it has this bearing and also EZ-Lube spindles.
If you wish to tell me your bearing number, spindle type and brake type I will be glad to confirm the correct item.
Products Referenced in This Question
Trailer Hub and Drum Assembly - 2K Axles - 7" Diameter - 5 on 4-1/2 - L44643 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Easy Grease Trailer Hub and Drum Assembly for 2K Axles - 7" - 5 on 4-1/2 - L44643 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44643
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.000 Inch I.D.
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Electric Trailer Brake Assembly - 7" - Left Hand - 2,000 lbs
- Shop: Everchill RV Refrigerator w/ Freezer - Reversible Doors - 10.7 cu ft - 12V - Stainless Steel
- Shop: Trailer Hub and Drum Assembly - 2K Axles - 7" Diameter - 5 on 4-1/2 - L44643 - Pre-Greased
- Shop: Electric Trailer Brake Assembly - 7" - Right Hand - 2,000 lbs
- Shop: Mounting Hardware for 7" Single Brake Assembly
- Search Results: dexter 7 inch electric brakes
- Shop: 19x47 Curt Cargo Carrier for 1-1/4" and 2" Hitches - Steel - 300 lbs
- Q&A: 12VDC Replacement Refrigerator for a Dometic DM 2872
- Shop: RV Antenna and Radio
- Shop: RV Interior Lighting
- Shop: Timbren Axle-Less Trailer Suspension w Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 3,500 lbs
- Shop: Vehicle Tow Bar Brake System
- Search Results: a35rs545
- Q&A: Recommended Axle for Replacing Odd Torsion Axle on 1940's Trailer
- Q&A: Could the Timbren Axle Less System A35RS545 Fit a 1984 Starcraft
- Search Results: ladder
- Shop: Brake Controller
- Q&A: How To Add Electric Brakes to a 1995 Coleman Stony Creek Trailer
- Q&A: Cross Referencing Dexter Part Numbers On 3500 lb Hub And Drum Assemblies
- Q&A: Can Brakes be Added to 2,000 lb Axle without Brake Flanges
- Q&A: What Gauge Wire Should be Used to Wire Trailer Brakes
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Search Results: brake mounting plate
- Article: Where to Position the Trailer Axle?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Tire Sizing
- Video: Redline Trailer Brakes 4-35 Review