How to Pick Out Replacement Trailer Hub for Trailer
Question:
I have a 1992 trailstar bass buddy pontoon trailer. Im looking for replacement hub assembly. Could you tell me which one I need? Thanks
asked by: Charles
Expert Reply:
In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out.
Next thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub or use a dial or digital caliper to get exact measurements of the spindle. The measurements needed are the parts of the spindle where the bearings ride.
If you get back to me with that information I will help you pick out the right hub assemblies. Or, you can follow the link I attached that will take you to the page that has all of our replacement hubs.
You would want to first select the bolt pattern that you have, next select the inner bearing you have, followed by selecting your outer bearing, and then all the correct hubs will be listed.
Product Page this Question was Asked From
Square #84 Spindle for 3,500-lb Trailer Axles - 1-1/2" Wide
- Trailer Spindles
- Standard Spindle
- 1-1/2 Inch Diameter
- Square
- For 3500 lb Axle
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2 - Pre-Greased
- Search Results: adjustable channel bracket
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-EZ-K Review
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Bulldog 5-Position Adjustable Channel Bracket for Cast Head Couplers - 8" Height Adjustment
- Shop: Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 2-1/4" Links
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: Spindle Recommendation for a Square 2x2 Axle
- Shop: Square #84 Spindle for 3,500-lb Trailer Axles - 1-1/2" Wide
- Search Results: channel bracket
- Search Results: adjustable channel
- Search Results: channel
- Search Results: suspension kit for tandem~axle trailers
- Search Results: lunette ring
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axles - 4" Drop
- Q&A: Is Idler Hub With 6 on 5-1/2 Inch Bolt Pattern Available for 3500 lb Axle
- Q&A: Replacement Trailer Hub with 7/8 inch Outer Bearing on a Boat Trailer
- Search Results: equalizer kit
- Q&A: Availability of 1 Inch Diameter Trailer Spindle To Fit on 1.25 Square Axle
- Q&A: #84 Spindle for 3,500 lb Axle
- Q&A: Which Spindles Will Work with the Trailer Hub Assembly for 2,000 lbs Axles
- Video: Review of CE Smith Trailer Hubs and Drums - Hub - CE13311
- Q&A: Trailer Grease Seal to Replace 127194TB
- Article: How to Charge a Dump Trailer Battery
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps
- Article: Roadmaster Vehicle Specific Base Plates
- Article: Trailer Hitch Receiver Sizes
- Article: Trailer Maintenance Schedule
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Most Popular Wheel Bearings