Can Two 6V Batteries be Wired in Series with 7 Foot Distance Between Them
Question:
I have 2 6 volts wired in series for 12v. One is on each side of the camper with a run of about 7foot of cable to connect them. Is this distance too long? In past campers, I had room for both batteries right next to each other. Now I dont. Thanks
asked by: Hal
0
Expert Reply:
The 7 foot wire between your two 6V batteries may result in a bit of a voltage drop on the output. The exact amount, if any, will also depend on what wire gauge you are using on the batteries. I do recommend using a thicker gauge wire for your application, as this will present less resistance to the current flow to help with this distance.
You can use 10 gauge wire like # 10-1-1, which is sold by the foot.
expert reply by:
Chris R
0
Product Page this Question was Asked From
Continue Researching
- Shop: 10 Gauge Primary Wire - Blue - per Foot
- Article: Trailer Wiring Diagrams
- Q&A: Parts Needed To Add Electric Drum Brakes To A Pontoon Trailer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Aftermarket Brake Control Wiring for 07-13 GM Full-Size Truck with Factory-Integrated Brake Control
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: What Gauge Wire Should be Used to Wire Trailer Brakes
- Q&A: Adding a Battery on an Enclosed Trailer to Power Interior Lights
- Q&A: Can The Mounting Studs Be Removed From The Electric Brake Assembly AKEBRK-35L-SA?
- Article: Brake Controller Installation for 2007 (New Body Style) - 2013 GMC Sierra and Chevy Silverado
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: How to Tell if Dexter Axle 3,500 lb Electric Trailer Brakes Will Fit Axle
- Q&A: What is the Proper Gauge Wire for Installation of a Brake Controller and Trailer Brakes
- Q&A: What Gauge Wire Is Needed To Run Charge Line for Battery From Truck to Trailer