Availability of Fulton Hinge Kit to Fit Pole Tongue that is 2 inch by 3 inch
Question:
Do you have a model similar to FHDPW330300 that has the hinge on the 2inch side verses the 3inch side. Thanks,
asked by: Scott C
0
Expert Reply:
The Fulton Hinge kit part # FHDPW330300 that you referenced is designed for a 3 inch by 3 inch pole tongue. If your tongue is 2 inch by 3 inch you'd just need to use 1/2 inch spacers on the sides of the tongue that are 3 inch and you'd be set. You'd want to have them welded on.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Fulton Fold-Away Coupler Hinge Kit for 3" x 3" Trailer Tongue - Weld On - Up to 5,000 lbs
- Folding Trailer Tongue
- Coupler Hinge Kit
- Up to 48 Inch Long
- Weld-On
- 5000 lbs GTW
- 3 x 3 Inch Tongue
- Fulton
more information >
Continue Researching
- Q&A: Idler Hub for Lippert 7k Axle that Has 6-Bolt Pattern
- Q&A: How Do You Weld the Fulton Weld On Hinge Kit for 3x3 Tailer Frame and What Material is it Made Of
- Q&A: Hinge Kit Recommendation for Trailer with Pole Tongue that Measures 2-1/2 inch Square
- Q&A: Can I Remove A Weld-On Trailer Coupler and Replace it With A Bolt-On Coupler?
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)
- Q&A: Swing-Away Tongue For Aluminum Trailer With Galvanized Steel Tongue
- Q&A: How to Bleed Brakes With Dexter Zinc-Plated Brake Actuator
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: What is Overall Length of Fulton Hinge Kit part # FHDPW330300
- Article: Trailer Wiring Diagrams
- Article: Where to Position the Trailer Axle?
- Article: Brake Controller Installation on a Ford Full-Size Van
- Article: Brake Controller Installation on a Full-Size Ford Truck or SUV
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)