Replacement Travel Trailer Axle For Square Drop Axle
Question:
I have a 1.5 in square 4 in axle on my vintage travel trailer. One of the spindles is gouged from the wheel bearing. I am looking for a replacement for it and replacement leaf springs. The springs measure out at 26.25 in. The axle measured 89.5 from hub to hub on the old hubs for the electric brakes. The spring to spring measurement is 54.5 inches. If there is a way to get a more accurate measurement of the axle length overall with the electric brakes removed i can get that as well. Thanks
asked by: Vince P
Expert Reply:
Thanks for the picture. The square axle you have also has a drop to it. Based on spring to spring measurement and the drop needed, we only have one good option for your axle, but it will include the electric brakes and the suspension you need so the leaf springs will be replaced with another option.
For your application, I recommend either the Timbren Axle-Less Trailer Suspension System w Electric Brake Hubs - 4" Drop Spindle - 3,500 lbs # A35RD545E or the straight spindle # A35RS545E if you don't need the drop in trailer height. These axles mount directly to your trailer frame and will bolt right up. You will need a 2 inch square tube (not included) cut to length for the integrated holes in the assemblies. I've attached a video to assist.
Products Referenced in This Question
Timbren Axle-Less Trailer Suspension w Electric Brakes - Standard Duty - No Drop - 5 on 4-1/2 - 3.5K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension w Electric Brakes - Standard - 4" Drop - 5 on 4-1/2 - 3.5K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- Universal Fit
- Drop - 4 Inch
- Timbren
more information >
Continue Researching
- Q&A: Hanger Spacing for 3500 LB. Tandem Axle Trailer
- Q&A: Typical Trailer Suspension Hanger Spacing Relative to Leaf Spring Size
- Q&A: Hanger Spacing When Using 23-1/8 Double-Eye Leaf Spring on Single Axle Trailer
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Q&A: Mounting Dimensions of the 3,500 lb Timbren Axle-Less Suspension System # A35RD545E
- Q&A: Is Grease Required For The Slipper Spring Bolts Of The Roadmaster Comfort Ride Suspension Kit
- Q&A: Parts Needed To Add Electric Brakes Onto a 3,500LB Dexter Axle Without Brakes
- Q&A: Can 4 inch Drop Axle be Replaced with Straight Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Raise Your Travel Trailer Height
- Article: Most Popular Wheel Bearings