Replacement 5 Inch Support Leg for RV Ladder With Round Base

Question

Question:

Do you offer this model leg with the round base flange and in Alum?

asked by: Bill

0

Expert Reply:

The Replacement Ladder Support Peg for Stromberg Carlson RV Exterior Ladder - Round Base - 12" # SC8531 is the aluminum support with 2-1/8 inch round base. We don't have them in the 5 inch length, but you can trim the 12 inch ones to desired length as long as you make a straight cut to put the end cap back on.

expert reply by: Jason S

0

click to enlarge

Answer 1

We offer a direct replacement for your current 45A Parallax/Magnetek 6345 Power Center. The Progressive Dynamics Replacement Converter, part #PD4645V is exactly what you'd need. I've linked to a product description video for the #PD4645V…

view full answer...

Answer 2

Yes, you do have the exact right replacement converter for your 45 amp Magnetek 6345, which is the option from Progressive Dynamics: - Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp #PD4645V I have added links below to…

view full answer...

Answer 3

If you are just looking for a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade for the Magnetek Converter Series 6300 Model 6332 that you have now.

view full answer...

Answer 4

For your Parallax/Magnatek 6300A model 6345, I recommend going with the: -Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers #PD4645V. This system has a 45 amp output same as your current model 6345, will work with flooded lead…

view full answer...

Answer 5

The Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp #PD4645V is a replacement for your converter. It will work very well based on the cross-referencing for a perfect fit. All converters have a battery charging system…

view full answer...

Answer 6

I wasn't able to find much about your Magnetek 6345 power converter but I was able to find out that it has a max 45 amp draw and is rated for AC/DC use which both match the Progressive Dynamics 4000 Series Inteli-Power Converter #PD4045KA. It is…

view full answer...

Answer 7

None of our suppliers offer a 6 inch stand-off, but a 12 inch version is available as part #SC8531. The end cap could be removed, then the stand-off could be cut down to the desired 6 inch length. You'd then reinstall the end cap and be good to…

view full answer...

Answer 8

I went out into our warehouse and measured the Replacement Ladder Support Peg #8535 and found that it measures 4-7/8 inches from the base to the black portion of the peg. If you could come up with a spacer that's a little bit wider than 1/2 of an…

view full answer...

Answer 9

If you cut the replacement ladder support part #8531-B down to 5-1/2 inches you do not need a new expansion nut. You can remove the plastic cap from the peg, push the star shaped nut down (pictured in the photo) and cut the peg. Then replace the…

view full answer...

Answer 10

We have 2 ladder standoffs with square bases, the Replacement Stand-Off Brace for Surco Universal Exterior RV Ladders #SPN-416, and the Replacement Ladder Support Peg for Stromberg Carlson RV Exterior Ladder #8535 you referenced. They both have the…

view full answer...

Answer 11

According to Progressive Dynamics, their #PD4645V Replacement 45A converter would be the proper replacement for your Parallax 7345 power converter. The unit is designed as a direct replacement for the converter in your existing power…

view full answer...

Answer 12

I confirmed with Progressive Dynamics that the replacement part you need is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp #PD4645V.

view full answer...

Replacement 5 Inch Support Leg for RV Ladder With Round Base

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching