Does Mighty Cord Adapter # A10-3050DBK Split the Incoming Hot Pole from the 30A Supply?

Question

Question:

My 50A system splits an incoming 240V 50A supply into two 120V circuits. Each is powered by one of the incoming hot leads from the 50A, 240V source. This 30A adapter has 3 poles. hot, neutral and ground. Does the adapter split that incoming hot lead to supply both hot leads on the 50A female connector?

asked by: Brad J

0

Expert Reply:

The Mighty Cord RV Power Cord Adapter - 50 Amp Twist Lock Female to 30 Amp Male # A10-3050DBK does split the incoming hot lead to supply both hot leads on the 50A female connector. I reached out to their engineers to confirm this for you.

expert reply by: Jason S

0

Answer 1

If I'm understanding you correctly, you'll be able to use your standard outlet at your home using an adapter like the Mighty Cord #A10-1550 , but you won't be able to use a standard extension cord . Using a household extension cord with…

view full answer...

Answer 2

The more length you add between the power source and the RV the more voltage drop you'll have. To combat voltage drop the gauge of the wire can be increased. Since you can't really increase the wire gauge on a power cord your only option is…

view full answer...

Answer 3

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

view full answer...

Answer 4

What you need for your Isuzu NPR truck is a powered converter #C59236. It is compatible with incandescent and LED trailer lights. I have included a link to the installation instructions for you. This harness does require a direct connection to the…

view full answer...

Answer 5

Assuming your Sprinter has the factory tow package with the 7-way at the rear bumper, in addition to the #RED24FR Redarc Tow-Pro Liberty Brake Controller, you'll also need the #3063-P wiring harness and the #331-TPH-017. The connector to install…

view full answer...

Answer 6

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

We definitely have some trailer jacks you can use as a replacement for your Dutton-Lainson but it doesn't look like anything we have will work as a direct replacement. If you'd like to stick with the Dutton-Lainson brand then I recommend…

view full answer...

Answer 9

No, there are no custom fit base plates for a truck that old. The only thing I can offer you is the Blue Ox Heavy-Duty Universal Bolt-On Adapter Tabs item #BX88266. These are compatible with Blue Ox tow bars and are a universal part. They bolt…

view full answer...

Answer 10

The best way to determine the weight capacity of your leaf springs would be to check the weight rating of the axle on your trailer. The trailer will have a plate or sticker on it that will list the VIN number. The weight rating of the axle should be…

view full answer...

Answer 11

I spoke to my contact at Kodiak about the issue you are having and he said that sometimes if a trailer braking system is doing way too much of the braking the pressure can get too high for the calipers and they can break (not brake). He said that the…

view full answer...

Answer 12

Blue Ox has base plate kits that fit your 2023 GMC Yukon XL with the part #BLU54VR which fits the AT4 models with 4L and the part #BLU58FR which fits the non-AT4 models. While we haven't had the chance to shoot an install video for either of…

view full answer...

Does Mighty Cord Adapter # A10-3050DBK Split the Incoming Hot Pole from the 30A Supply?

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching