How to Pick Out Replacement Bearings for Trailer with Race L44610
Question:
Hi! I have a Escort WT17PD trailer that needs new wheel bearings! These were so worn that I hardly were able to identify any numbers on the crushed bearings, but I managed to get one number L44610, this was the outer bearing. Inhave meassured the outer rings on both bearings and the inner bearing was 60mm wide and the outerL44610 was 50mm. Do you have a kit with both these bearings including the seals? Thanks for any
asked by: Thomas
Expert Reply:
The part # L44610 is actually a race for either a bearing # L44643 or # L44649. Since you said your bearings are different sized most likely what you'll need for a replacement bearing kit is the part # BK2-100 which comes with L44649/L68149 Bearings.
You can verify this by measuring your trailer spindle where the bearings ride. If those dimensions are 1.38 inches and 1.06 inches then this is the correct kit.
Products Referenced in This Question
Replacement Race for L44643 and L44649 Bearings
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 1.980 Inch O.D.
- Bearing L44643
- Bearing L44649
- Race L44610
- 2000 lbs Axle
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44643
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.000 Inch I.D.
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: What is the Best Grease for Trailer Bearings
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: USA Made Bearing Kit For An AL-KO 4,400 lb Axle
- Q&A: Timken Bearing Kit Fitment for a 3,500 lb Axle
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Bearing Kit Recommendation for 84 Spindle K71-717-00
- Q&A: Difference Between RG06-050 and Timken TMK58ZR Grease Seal
- Q&A: Tips for How to Identify a Trailer Axle