Recommended Disc Brake Assemblies for Nev-R-Lube Bearing 7,000 or 8,000 lb Axle Capacity
Question:
I have a 2013 NuWa HitchHiker Champagne with three 7000# Mor/Ryde IS axles, 12 x 3.25inch drum brakes, Nev R Lube bearings, 8 lug hubs, zero off set wheels. I would like to convert it to discs brakes. What do you have to offer?
asked by: Ken W
Expert Reply:
For your upgrade to disc brakes, we have the Dexter Disc Brake Kit - 12-1/4" Hub/Rotor - 8 on 6-1/2 - E-Coat - 8K - Nev-R-Lube # K71-646-2-91. This will give you the assemblies to fit your 7K axles which are the same bearing size as the 8K axles, but you will also need to upgrade your brake actuator as disc brakes require a psi rating of at least 1,500 lbs compared to the 1,000 lbs of drum brakes.
These assemblies will work with zero offset wheels that are 16 inches or larger.
You can utilize the hydraulic lines from a drum brake system if you have them and add the HydraStar Electric Over Hydraulic Actuator for Disc Brakes - 1,600 psi # HBA16.
If you don't have the brake lines, then I recommend the HydraStar Electric-Hydraulic Actuator w/ Line Kit for Disc Brakes - 1,600 psi # CAR-HBA16-2 instead with the Hydraulic Line Kit, 3rd Axle - Drum and Disc # 9579-01 if you have a triple axle trailer.
Products Referenced in This Question
Hydraulic Line Kit, 3rd Axle - Drum and Disc
- Accessories and Parts
- Brake Actuator
- Trailer Brakes
- Disc Brakes
- Hydraulic Drum Brakes
- Brake Lines
- Steel Line and Flexible Hose
- Brake Line Kits
- Third Axle
- Redline
more information >
Hydrastar Electric-Hydraulic Actuator w/ Line Kit for Disc Brakes - 1,600 psi
- Brake Actuator
- Electric-Hydraulic Brake Actuator
- 1600 psi
- Disc Brakes
- Hydrastar
more information >
Hydrastar Electric Over Hydraulic Actuator for Disc Brakes - 1,600 psi
- Brake Actuator
- Electric-Hydraulic Brake Actuator
- 1600 psi
- Disc Brakes
- Hydrastar
more information >
Product Page this Question was Asked From
Dexter Disc Brake Kit - 12-1/4" Hub/Rotor - 8 on 6-1/2 - E-Coat - 8K - Nev-R-Lube
- Trailer Brakes
- Disc Brakes
- Standard Grade
- 8 on 6-1/2 Inch
- Hub and Rotor
- 5/8 Inch Studs
- 8000 lbs Axle
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Parts Needed to Switch a Trailer From Surge Brakes To Electric Over Hydraulic Brakes
- Article: Overview of Lubricating Grease
- Q&A: Wiring Diagram for Titan BrakeRite EHB Electric-Hydraulic Actuator # T4822500
- Q&A: Replacing Igniter Battery in Furrion 2-In-1 Range Oven
- Q&A: Disc Brake Kit for Trailer with 8k Lippert Axles
- Q&A: Disc Brake Kit that Fits 8k Lippert Axle of 2020 Crossroads Redwood
- Q&A: Replacement Hub and Drum assembly for ALKO 8480
- Q&A: Chart With Error Codes Explained for the Prodigy P2 90885
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Adding Electric Over Hydraulic Disc Brakes