Weight Distribution System Recommendation with Sway Control for 8,000 lb Trailer
Question:
im looking for a wdh with sway to tow a 20 foot trailer 8k lbs loaded with my 17 tundra. Looking for one that will still back up well, provide 4 points of contact to trailer, and wont break the bank. I know im asking alot but im hoping for some insight. Thanks!
asked by: Jason
Expert Reply:
The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use.
Since your trailer weighs 8,000 lbs your tongue weight is going to be most likely between 800 and 1,200 lbs. For a system that matches this well and has sway control the Reese Steadi-Flex part # RP66560 is the best priced option that will work great. It has a tongue weight range of 600 to 1,200 lbs and has a great 4 point friction sway control setup between the head and the bar hangers.
For a 2 inch ball you would want part # A-90 and for a 2-5/16 inch ball # 19286.
Products Referenced in This Question
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 12000 lbs GTW
- Class IV
- Class V
- Draw-Tite
more information >
2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 10000 lbs GTW
- Class IV
- Class V
- CURT
more information >
Product Page this Question was Asked From
Reese Steadi-Flex Weight Distribution System w/ Sway Control - Trunnion - 12K GTW, 1.2K TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 1000 lbs
- 1100 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Determining Trailer Tongue Weight
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Recommended Weight Distribution System for a 6,800 lbs 2019 Lance 2465 Travel Trailer
- Q&A: Surge Brake Compatible Weight Distribution System Recommendation
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Article: How to Measure for Trailer Hitch Drop
- Article: Best Hitches for Travel Trailers (2022) - For a Smooth, Sway-Free Ride
- Article: Most Popular Wheel Bearings
- Q&A: Recommendation for Upgrading From Fastway Weight Distribution Hitch
- Q&A: Maximum Towing Capacity of 2014 Chevy Traverse
- Q&A: Best Towing Mirror Extensions For a 2024 GMC Sierra 1500
- Q&A: Can You Back Up Trailer with Reese Dual Cam II Weight Distribution System Installed
- Q&A: What Are The Differences Between The Reese Steadi-Flex And Equalizer Weight Distribution Hitches