Replacement Trailer Axle for a Jon Boat Trailer with 49 Inch SC and 60 Inch HF
Question:
Looking for Jon Boat axle and both hubs. 1800 lbs or up. 5 lugs on 4-1/2. 60inch flange to flange. 49inch spring centers.
asked by: Rick
Helpful Expert Reply:
If the distance between the center of the bolt holes on your spring seats measures to be 48" apart then you can use the Dexter Idler Trailer Axle w/ Hubs part # 20545I-EZ-60-10. This axle is 60" long and has a 2,200 lb capacity. It comes with ready to use idler hubs that have a 5 on 4-1/2" bolt pattern. The axle also has EZ-lube spindles which as the name states makes for easy preventative maintenance.
If the distance between the center of the bolt holes on your spring seats do measure 49" then you can simply move each seat out a 1/2" on each side of the axle. I have attached a review an installation video of this axle for you as well.
Product Page this Question was Asked From
Dexter Idler Trailer Axle w/ Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,200 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 2200 lbs
- 5 on 4-1/2 Inch
- 48 Inch Long
- 60 Inch Long
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Q&A: Does The Redline Grease Seal 13194 Have Markings Of TCM 13194 TM and a Spring On The Inside Lip
- Shop: Grease Seal
- Shop: Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Q&A: What Causes Grease Leaking Out of Bearing Buddy Bearing Protectors
- Video: Redline Trailer Bearings Races Seals Caps - Seals - 13194 Review
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Shop: Spring Seat for Typical 2,000-lb, Round Trailer Axles with 1-3/4" Diameter - Qty 1
- Q&A: Issue with Bearing Buddy Leaking Grease from Overfill Port
- Q&A: Is There a Grease Seal 13194
- Shop: Dexter Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Shop: Bearing Buddy Bearing Protectors - Model 1980A w/ Auto Check - Chrome Plated (Pair)
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Q&A: Bearing Buddy Recommendation for Dexter Hub 8-248 3,500 lb Axle
- Q&A: Troubleshooting Overheating Hubs on a Trailer With New Bearings and Grease
- Q&A: What is Normal Temperature Rating for Trailer Hubs
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Search Results: 62 inch axle
- Search Results: boat trailer axles
- Search Results: leaf spring hanger kit
- Search Results: 265 inch leaf springs
- Search Results: 54" trailer axle
- Video: CE Smith Galvanized U-Bolts Review
- Video: CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE15283GA-8 Review
- Search Results: actuator
- Search Results: winch