B&W Patriot Pins are Too Short to Fit Reese Adapter RP30154 for Ram 2500 Factory Pucks

Question:

I purchased BW Patriot 5th wheel slider hitch last fall BWRVK3270 did not use as late in the season- I found out that the rail pins that came with it are too short for my Reese 5th wheel rail adapter RP30154- adapter for Ram 2500 factory puck system. I had been using it with a BandW lil Rocker - pins are long enough - I want new pins that will work - I have looked on your web page I believe I have it narrowed down to Curt C16902 working length of 3.56, the RB58467 long pin, and reese # 6014 I want to be sure. I really do not want to pay a lot for the RB58467 long pin if I dont have to. The adapter and the BW slider were purchased from you. Your help will be appreciated.

asked by: Paul D

Expert Reply:

This is a situation where you would go by the dimensions of the pins compared to what is required for your hitch and the adapter # RP30154. Pin set # 6014 have a useable length of 3-1/4 inches. Replacement Rail Pins and Clips # C16902 are a great option since they are 3-1/2 inches long and the same 1/2 inch diameter as the other options.

The Reese pins # RP58467 are the longest at 4-1/4 inches so it is up to you which route you want to take. In my opinion the longer the pin the easier it is to get the clip on.

expert reply by: Michael H