Recommended Trailer Hitch and Wiring Harness for 2018 Toyota RAV4
Question:
2018 rav4 hitch wire harness witch one do you recommend
asked by: Christopher B
Expert Reply:
For your 2018 Toyota RAV4 I recommend the Curt # C13406 due to how concealed it is after being installed. This is a Class III hitch with a 2" receiver and is a complete bolt-on installation that will not require drilling into the frame of your vehicle. Please keep in mind that this hitch, like any that you install, will limit your use of the hands-free liftgate to areas away from the center of the hitch receiver.
To add a 4-way so you can power your trailer's lights I recommend the T-One Vehicle Wiring Harness # 118578 which you'll only need to plug in to connection points in your RAV4's trunk and run a hot lead to your battery. I've added a link to a video showing this being installed on a '18 RAV4 that you can check out.
If you are going to be towing, I recommend checking out Ball Mount Kit # 989900, which may fulfill your towing needs in one tidy package; two ball mounts - one with a 3/4” rise or 2” drop and the other with a 2-3/4” rise or 4” drop - a 1-7/8” hitch ball, a 2” hitch ball, and a pin and clip. You can use the link to the help article on ball mounts I've added to determine if this kit will give you the correct amount of drop or rise. I've also attached a link to our page with each of our ball mounts as well as a video review of the ball mount kit.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Trailer Hitch Receiver with the Most Ground Clearance on a 2017 Toyota RAV4
- Q&A: Which Hitch for 2018 Toyota RAV4 Has Best Ground Clearance
- Q&A: Comparing the Curt Hitch C13416 and EcoHitch Hitch 306-X7396 for a 2019 Toyota RAV4
- Q&A: What is Required for Trimming the Panel on my 2018 Toyota Rav4 to Fit the Curt Hitch
- Q&A: Recommended Trailer Hitch for a 2024 Toyota RAV4
- Q&A: Where To Reinstall the Keyless Entry Sensor On A 2016 Toyota RAV4 After Curt Hitch Install
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Hitch Installation Tips
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: How to Measure for Trailer Hitch Drop