Parts Needed to Flat Tow 2016 Ford Explorer Sport

Question:

Hello, can I use the RM- 15247 instead of the RM 154. The RM - 15247 seems cleaner

asked by: Scott G

Expert Reply:

There is a big difference in terms of what is needed to flat tow the vehicles and while you do not need to disconnect the battery on the 2015, you do need a battery charging kit. Nothing was "figured out" so to speak, they are simply very different vehicles. You mentioned getting a 2015, and because all of the parts needed is so extensive, listing everything for both is going to be a bit overwhelming so is there a year you are leaning towards that I can start with for you? Let me know and I'll be happy to tell you exactly what you'll need.

expert reply by: Kyle S

Scott

5/7/2018

So I bought the 2016 Ford Explorer Sport.

Kyle S.

5/7/2018

In order to flat tow your 2016 Ford Explorer Sport you'll need to start with compatible base plates. I recommend the Roadmaster EZ4 Base Plate Kit # RRM-524453-5, so long as your Explorer does NOT have the EcoBoost engine, or if it does, the EZ4 Base Plate Kit # RM-524446-4, though this will NOT work if you have Active Air Shuttters. For a tow bar I recommend going with the Roadmaster Falcon 2 Tow Bar # RM-520 because of how easy the tow bar is to connect to the base plates as well as its long arms, which make it easier to maneuver when towing; you will also need safety chains # RM-643. For wiring kit that will allow your '16 Explorer Sport's lights to function while being towed you can use the Roadmaster Universal Hy-Power Diode Wiring Kit # RM-154 and Automatic Battery Disconnect # RM-766 is also recommended because this vehicle will require you to disconnect your battery. A supplemental braking system is a requirement in most states and I highly recommend the SMI Stay-IN-Play # SM99251 for this. This is a proportional braking system which is a one-time install which you can leave in so you'll never have to deactivate or re-activate it. Finally, it is likely you will need a high-low adapter such as # RM-076 to keep your tow bar level with your tow vehicle. The adapter you need is going to depend on some measurements you'll need to take. I have added a link to a help article on high-low adapters which explains the measurements you'll need, as well as a link to our page with our selection of adapters. I've also attached links to video reviews of the aforementioned parts for you to take a look at.

Scott

5/16/2018

Hello, can I use the RM- 15247 instead of the RM 154. The RM - 15247 seems cleaner

Kyle S.

5/16/2018

Absolutely! The Roadmaster Diode 7-Wire to 4-Wire Flexo-Coil Wiring Kit # RM-15247 is a fit for your 2016 Ford Explorer Sport and will work well for you.