How to Determine if Torklift Glowstep 4 Step kit part # TLA8004 Fits RV

Question

Question:

How do I go about measuring and finding out the part number for a TorkLift Glow Steps to fit my 2016 303RLS Grand Design Reflection?

asked by: Nolan

0

Expert Reply:

The height range of the Torklift Glowstep 4 Step kit part # TLA8004 is 32-1/2 to 40 inches which you'd measure from the height of where you'd mount the steps to the ground for comparison and then the mounting base dimensions are 27-7/16" wide x 12" deep. You'd need to measure the mounting area you have as well to be sure if this will fit.

I attached an install video for this step kit for you to check out as well.

expert reply by: Jameson C

0

Answer 1

I spoke with my contact at Torklift and he informed me that from the mounting surface of where the Torklift Steps part #TLA8004 attaches down to the first step measures 3 inches in the highest setting. He also said that there is a 3 way adjustment…

view full answer...

Answer 2

You want to measure from the ground to the bottom of the door opening. If it's between 32-1/2 inches and 40 inches the TorkLift GlowStep Revolution Scissor Steps #TLA8104 would be a correct fit. The mounting base dimensions are 25-7/16 inches…

view full answer...

Answer 3

If the mounting surface on your RV is 32 inches off the ground the 4 step version of the TorkLift GlowStep Revolution Scissor Steps #TLA8004 would be the best choice as it has 7-1/2 inches between each step which would put you right at the correct…

view full answer...

Answer 4

We have a large selection of RV steps available that may work great on your 2016 Forest River Prime Time Crusader. When trying to locate a step assembly that will fit your trailer, you will first want to determine the mounting base measurements of…

view full answer...

Answer 5

Thanks for the axle information, Mike! Here are the correct parts according to my contact at Curt: - Bearing #02475 and Race #02420 - Bearing #25580 and Race #25520 - Grease Seals #RG06-070

view full answer...

Answer 6

There are differences in them but we do have what you are looking for and they can in some situations be used together. The Replacement Trailer Hub Bearing you have part #02475 and Replacement Race for 02475 Bearing part #02420 are designed to work…

view full answer...

Answer 7

The TorkLift GlowStep Revolution Scissor Steps #TLA8004 are a possible fit for your 2016 Dutchmen Voltage 3914. These steps are designed to work with a entry height measurement of 13-7/8 inches to 32-1/2 inches measured from the ground to the floor…

view full answer...

Answer 8

Yes. The TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear - 4 Steps - 375 lbs - Black Bracket #TLA7834 can be removed from the bracket by detaching the pull pins like the #TLA7804-8000. The main issue you might have is that the bracket…

view full answer...

Answer 9

Good news, I can help you find a wider step than the 24 inch LC341504. I've linked all the steps for you but if you look through the filters there should be a measurement column and there are sizes from 14 inches to 30 inches wide. The Lippert…

view full answer...

Answer 10

Since the Torklift Glowstep #TLA7804-8000 has an entry height range of 31 to 42 inches your height of 37 inches would work well.

view full answer...

Answer 11

The TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear #TLA8004 referenced in your question is a 4-step assembly with a step platform dimension of 22 inches wide and 8 inches deep. The mounting base measures 27-7/16 inches wide and 12 inches…

view full answer...

Answer 12

Yes, you can absolutely still use and walk on the TofkLift GlowStep Revolution Scissor Steps #TLA8004 even if they aren't fully extended. I did reach out to my contact at TorkLift to verify this. They will have no problem supporting weight when…

view full answer...