Will a 5th Wheel Hitch Fit on a 2012 Toyota Tundra with an Extended Fuel Tank
Question:
I have a 2012 Toyota Tundra Double Cab 4X4 5.7 engine. The truck has an extended 46 gal metal fuel tank on the drivers side that runs from the engine to the rear axle. There may be 1-2 inch between the end of the fuel tank and the rear axle. Can I still install a fifth wheel hitch on my Tundra? How much does the hitch itself weigh?
asked by: Bill A
Expert Reply:
To install a 5th wheel hitch like the Curt A16 Slider # C16521 that you referenced, you first need to install a rail kit on your 2012 Toyota Tundra.
I recommend looking at the Curt Custom Fifth Wheel Installation Kit # C16468-204. Since it is a custom fit option it installs using pre-existing holes in the frame of your pickup. Although I wouldn't be able to say for sure if the brackets will fit around your extended fuel tank, I have linked the installation details for the kit so you can compare the installation to what your frame looks like.
Please note that the A16 slider is meant to be used for a 6-1/2' bed. If you have a longer or shorter bed just let me know and I can make a recommendation for you.
You may also be interested in putting a 7-Way in the bed of your Tundra. By installing the Curt # C56070 it will make connecting and disconnecting the wiring from your 5th wheel much easier.
Products Referenced in This Question
Curt Custom Fifth Wheel Installation Kit for Toyota Tundra - Carbide Finish
- Fifth Wheel Installation Kit
- Custom
- Above the Bed
- CURT
more information >
Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector - 7' Long
- Custom Fit Vehicle Wiring
- Fifth Wheel and Gooseneck Wiring
- 7 Feet Long
- Custom Fit
- 7 Round - Blade
- CURT
more information >
Product Page this Question was Asked From
Curt A16 5th Wheel Trailer Hitch w/ R16 Slider - Dual Jaw - 16,000 lbs
- Fifth Wheel Hitch
- Sliding Fifth Wheel
- Above Bed Rails
- 4000 lbs Vertical Load
- 16000 lbs GTW
- Cushioned Double Pivot
- Standard - Double Jaw
- 17-1/2 - 21-1/2 Inch Tall
- 12 Inch Fore/Aft Travel
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch
- Article: Gooseneck to 5th Wheel Adapters
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Q&A: What Does B and W Turnoverball Gooseneck BWGNRK1320 Weigh
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Q&A: Recommended Air Bag Helper Springs For a 2024 Ford F-250 Super Duty
- Q&A: Does Truck with 6-1/2 Foot Bed Need a Slider Hitch
- Q&A: Will The Curt Crosswing Fit a 2016 Ram 2500 Short Bed With Factory Puck System
- Article: Sidewinder with Rotating Turret for Short Bed Pickups
- Article: Ram Trailer Tow Prep Package
- Q&A: Weight Of The MORryde Cushioned 5th Wheel Pin Box # MR84VR
- Article: Fifth Wheel Trailer Hitch Information and Installation Tips
- Article: 5th Wheel Hitch Installation | The Ultimate DIY Guide
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer