Dimensions of the Redarc Tow-Pro Elite # 331-EBRH-ACCV2 For Installation on a 2016 Hyundai Santa Fe
Question:
Im interested in Redarc Tow-Pro Elite # RED44FR because the control can be hidden and placed out of the way. In the video install of this on a 2012 Toyota 4runner, you show the controller mounted on the back side of console so only 2 screws are shown. Is there enough space to mount this control similarly on my vehicle 2016 Hyundai Santa Fe Sport 2.0 FWD with Tow Package? Also, we have a spare port near the heated seat controller that would work well for the control knob. The 4runner video also stated that you have to be sure there is enough clearance behind those ports for the switch housing. Do you guys know if there enough clearance in my vehicle?
asked by: Eric J
Expert Reply:
We have the dimensions on the main unit and control knob for the Redarc Tow-Pro Elite # RED44FR, but unfortunately we have not had the opportunity yet to install one of these on a 2016 Hyundai Santa Fe Sport 2.0 FWD so I don't have a way to confirm if it would fit on my end.
The main unit measures 3-3/8" long x 3-15/16" wide x 1-1/8" tall and the control knob measures 2-3/8" long x 3/4" wide x 7/8" tall. I have linked some photos with these dimensions marked so you can take some measurements on your Santa Fe to see if you have enough clearance.
If your tow package came with a 7-Way then there is most likely some wiring under your fdriver side dash that you can use a circuit tester # PTW2992 to verify the functions to match up with the pigtail from the Tow-Pro Elite. If you only have a 4-Way then you will want to follow the same installation steps of the Kit # ETBC7 for the Tekonsha Prodigy P3 # 90195 that I have linked.
Products Referenced in This Question
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Redarc Tow-Pro Elite Brake Controller - Dash Knob - 2 Braking Modes - 1 to 3 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Dash-Mounted Knob
- Hidden
- Up to 3 Axles
- Indicator Lights
- Redarc
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: REDARC Tow-Pro Liberty vs Tow-Pro Elite
- Article: 2005-Current Volkswagen Touareg, Audi, or Porsche Cayenne
- Q&A: What is Difference Between Redarc Tow Pro Liberty and Elite
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Potential Brake Controller Harness Location on a 2023 Nissan Frontier
- Q&A: What is the Difference Between the Redarc Tow Pro Elite V2 and v3
- Q&A: Comparing the Curt Spectrum Brake Controller to Redarc Tow-Pro Elite
- Q&A: Which Blue Ox Weight Weight Distribution System for Lance 1475 Trailer
- Q&A: My Vehicle has a 4-Pin Trailer Plug, but Trailer has 7-Pin Trailer Plug