Is Adjustable Ball Mount w/Sway Control Tab 7390 Compatible with Curt Friction Sway Control Bar
Question:
Hi there, Do you happen to know if this is compatible with the Curt sway control arm. They look pretty much the same but Im wondering about the measurements. thank you.
asked by: Sheree A
0
Expert Reply:
Yes, you can use the Adjustable ball mount with sway control tab # 7390 with the Curt friction sway control bar. The shank on the ball that will mount to the tab on this ball mount is plenty long enough and is in the right position so that the sway control unit is at the proper angle.
expert reply by:
Michael H
0
Product Page this Question was Asked From
Ball Mount Adjustable with Sway-Control Tab, 6,000 lbs
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 5 Inch
- Rise - 4 Inch
- Fits 2 Inch Hitch
- 6000 lbs GTW
- Class III
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Charge a Trailer Battery While Driving: 3 Common Problems (And How to Fix Them)
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Dimensions of Reese Goose Box 5th Wheel to Gooseneck Adapter # 94720
- Q&A: No 12V Power to Brake Controller on a 2001 Ford F-250
- Q&A: What is Maximum Rise of the B&W Tow & Stow 2-Ball Mount # BWTS10035B
- Article: Steel vs. Aluminum Ball Mounts
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Q&A: How to Determine if a Vehicle has a Class I or Class II Trailer Hitch
- Q&A: Can Sway Control Plate # RP26003 be Flipped for Use on Left of Ball Mount on 2009 Toyota Highlander
- Q&A: Length From Pin Hole to Ball on Curt Class III Ball Mount C45056
- Q&A: Longest Weight Distribution Shank for a 2-1/2 Inch Hitch Receiver