Mounting Screws for Lippert Entry Door Window Frames

Question

Question:

Will the Valterra entry door frame screws work for the Lippert entry door window frames? Thank you.

asked by: Robin B

0

Expert Reply:

The Valterra Mounting Screws # A7704812 referenced in your question will work just fine to install the Lippert Window Frame like # LC363370. 12 screws are included with this hardware kit and they feature a black color head to match the frame.

expert reply by: Chris R

0

Answer 1

The Valterra Replacement Window Frame for RV Entry Doors #A77008 is the closest window frame replacement we carry to match your 15" wide by 25 1/4" window that measures in at 15 3/4" wide and 25" long, with an inside diameter of…

view full answer...

Answer 2

The Valterra Entry Door Window Frame Assembly - Exterior - Black #A77051 you were looking at is just the exterior frame. The #A77012 you mentioned is the interior side of the frame. If you are needing to replace both of the interior and exterior…

view full answer...

Answer 3

To add a gasket seal to something like the Valterra Replacement Window Frame for RV Entry Doors #A77008 you can use the TremPro 644 Silicone Sealant #0160297 which is what we use for our vent installations.

view full answer...

Answer 4

There are 15-3/4" by 25" RV window door frames with glass, but they do each come with frosted glass, the Valterra Entry Door Window Frame Assembly - Black #A77051, and Lippert Components Replacement Window Frame with Seal for RV Entry Doors…

view full answer...

Answer 5

Yes, the interior frame part number #A77012 that you referenced does screw to the exterior frame part #A77008 that you referenced and that's how the two pieces are held together. The interior frame has screw holes and then the outside frame has…

view full answer...

Answer 6

The 1/8" thick tape is most common for side window installation and repairs so I recommend the Alpha Systems Butyl Tape for RV Weatherproofing part #AL42FJ for this. It can always be doubled up if needed. I recommend the 3/16" thick tape…

view full answer...

Answer 7

As long as you're using frames that are the same size as your window cutout, you can replace the frame and glass without any issues. The Deluxe Window Frame for RV Entry Doors - Black #37211021 is held together with screws like you mentioned and…

view full answer...

Answer 8

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 9

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 12

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Mounting Screws for Lippert Entry Door Window Frames

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching