Trailer Hitch Options and Effects on Rear Lift Gate Feature on 2018 Toyota RAV4
Question:
Just read about the possible problem that installation may have with the hitch.Hitch may interfere with the Hands-free Liftgate sensors and functionality may be very limited or possibly lost. So what do I do? Take a chance on this product or what?
asked by: Jerry R
Expert Reply:
Vehicles with rear lift gate sensors use several of these across the rear bumper area. Hitch installation on such vehicles usually means that only the centrally-positioned sensor will be affected. Those to the sides of the hitch tube usually function without issue. So, in practical terms, if you were approaching the rear of the RAV4 with arms full of grocery bags you'd just want to swing your foot by one of the side-positioned sensors.
There are both smaller 1-1/4-inch Class II hitches like # C12108 and also 2-inch Class III types like # e98864 made for your RAV4. We always suggest the 2-inch size since the incremental cost is usually nominal but the weight capacity is often substantially greater. Both types install identically so it is no tougher to bolt on a 2-inch Class III hitch. Please have a look at the linked install video for the 2-inch etrailer hitch # e98864. Your vehicle towing weight ratings could differ so always check your manual.
If you also need a 4-pole wiring harness for trailer lights you can use kit # 118578; installation of this item is shown in the second linked video.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 4000 lbs WD GTW
- 2 Inch Hitch
- 525 lbs WD TW
- Visible Cross Tube
- etrailer
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 350 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: My Trailer Hitch Doesn't Fit
- Article: Flat Towing Package for 2018 Jeep Wrangler JL and JL Unlimited
- Q&A: Trailer Hitch For A 2024 RAV4 Hybrid And Recommended Installer
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Which Hitch for 2024 Toyota RAV4 has Best Ground Clearance
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Most Popular Wheel Bearings
- Article: How to Choose a Bike Rack That Will Clear a Rear Mounted Spare Tire or Bumper
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Q&A: Does etrailer.com Hitch # E98864 Fit 2018 Toyota RAV4 Hybrid and Allow Handsfree Liftgate
- Q&A: Comparing Draw-Tite and Curt Trailer Hitches for Ground Clearance on 2020 Toyota RAV4
- Q&A: Recommended Brake Controller and Installation on 2021 Toyota RAV4
- Article: Routing the Power Wire for a Trailer Wiring Harness