4-Way Flat For 2018 Lexus NX 300
Question:
what trailer wiring is offered for a 2018 Lexus NX300 Sport? I need a four pin flat
asked by: Bill M
Expert Reply:
I reached out to the manufacturers that make the 4-flats, Curt and Cequent and they replied that they do not offer any item for the NX300 at this time. However there is a universal splice in harness part number # C59236. It allows you to install a 4-way flat on your vehicle with this splice-in harness. Powered converter connects directly to battery to reduce strain on wiring. Potted, SMT construction boosts water and vibration resistance. Works with 2-wire, 3-wire, and PWM systems.
To determine where to splice into your vehicle's tail light wiring, you will need to consult the included instructions. Use the quick-splice connectors to attach the input wires of the tail light converter to the corresponding wires from your vehicle. Once you've spliced in the converter, connect the included hot lead to the black wire and run it up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery.
Then locate a flat surface inside your vehicle near the tail lights and adhere the black converter box using the provided double-sided tape. Find a raw metal surface to use as a ground point and secure the white ground wire using the provided ring terminal and screw. Finally, secure the converter wires to your vehicle using the included cable ties.
Products Referenced in This Question
Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Universal Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 4000 lbs WD GTW
- 2 Inch Hitch
- 525 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Adding Brakes to a Mobile Home Axle
- Q&A: Hanger Spacing Dimensions for Installing Double-Eye Leaf Springs on a Trailer
- Q&A: Can Hydraulic Brakes of Demco Tow Dolly be Converted to Electric Brakes
- Q&A: Installation Information for the Replacement Cables for Enclosed Trailer Ramp Spring # ERS160D96
- Article: What To Look For When Buying Ratchet Straps
- Q&A: What Type Of Hydraulic Fluid Should I USe With A Lippert Hydraulic Leveling System?
- Q&A: What Type of Fluid to Use in Lippert Hydraulic Leveling Systems
- Q&A: Which Type Of Hydraulic Oil Do I Use On Lipert Leveling System # LC672136
- Article: How to Install E-Track in 3 Easy Steps
- Article: How to Charge RV Batteries
- Article: How to Choose the Right Trailer Hitch Class
- Article: What Exactly is Tongue Weight?
- Article: Trailer Hitch Installation Tips
- Article: Flat Towing Package for 2007-2018 JK Jeep Wrangler and Wrangler Unlimited