Is It Possible to Lift a 2016 Winnebago Winnie WD170S

Question:

I have a 2016 Winnebago Winnie WD170S I would like to lift however I dont know what axle it has or what the right part would be. It is a single axle, any suggestions? Thank you in advance.

asked by: Ed G

Expert Reply:

It might be possible to lift your 2016 Winnebago Winnie WD170S. You can do this by moving the axles from being above the leaf springs to below the leaf springs.

The diameter of your trailer axle will determine the size of the parts that you will need to order. If your axle is 3 inches diameter, the Dexter Trailer Springs Over-Under Conversion Kit, # K71-385-00, would be a great choice and if your axle is 2-3/8 inch diameter you could use the Over-Under Kit, # K71-384-00. These kits can be installed without welding but the manufacturer strongly recommends having the new spring seat tacked in place on the other side of the trailer axle.

expert reply by: Jameson C