Spindle Recommendation for Fitting Hub with 6 on 5-1/2 inch Bolt Pattern
Question:
Hi, I need a spindle and hub Assy for a 6 on 5 1/2 bolt pattern. My hub is no longer made and it is bad. I have a square axle as seen in pic. Do you have something that would work?
asked by: Scott
Expert Reply:
The 42 spindle part # TRU37FR that you referenced is compatible with hubs that have 6 on 5-1/2 inch bolt patterns like the # 8-201-5UC3-EZ.
If you need brake assemblies as well you'd want the part # AKEBRK-7-SA for a left and right hand side that matches the spindle and hubs.
![Jameson C](https://images.etrailer.com/static/images/catg/people/371_tn.jpg)
Products Referenced in This Question
Dexter Trailer Hub and Drum Assembly - 5,200-lb E-Z Lube Axles - 12" - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- 25580
- LM67048
- For 5200 lbs Axles
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12 x 2 Inch Drum
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
#42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles - 2-1/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 2-1/4 Inch Diameter
- Round
- For 5000 lb Axle
- For 6000 lb Axle
- For 7000 lb Axle
- TruRyde
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams
- Q&A: Where to Attach Safety Chains When Using a Gooseneck Plate in 5th Wheel Rails
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What is Distance Between Mounting Holes of Dexter A-60 Coupler
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Does Chipped and Burned Spindle Need to Be Replaced
- Q&A: Comparing the E-Z Lube Hubs to the Standard Hub Assemblies for Trailer Axles
- Q&A: Replacement Spindle Recommendation for Dexter # 42
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Correct Replacement Bearing and Race to Match 02475 Bearing and 14276 Race
- Q&A: Replacement Seal for National Seal or Timken Seal 472920