bing tracking image
Q & A Icon

Troubleshooting Malfunction Of T-One Wiring Harness On 2016 Nissan Rogue  

Question:

Item #118480. I ordered this for my 2016 Nissan Rogue. I followed the video on website for install. When connected to trailer and turn lights on the lights on the right side of trailer are fine. On the left side the side marker light comes on but the tail light does not. The break light and blinker come on but just the rear running light drivers side does not. The drivers side rear tail light of vehicle comes on. I double checked the trailer with my other vehicle and the trailer lights all work fine. I’ve disconnected all connections and reconnected and ensured the yellow wire is on drivers side and green is on passenger.

0

Expert Reply:

I am sorry you are having trouble with your wiring of the Tekonsha T-One Wiring Harness, Item # 118480. At least it sounds like you can narrow down the trouble spot to your 2016 Nissan Rogue side.

I would start by making sure you have good ground connection on a clean and corrosion free metal surface. I know you have connected and reconnected the wires but check them again with a circuit tester like Item # PTW2993 and make sure you have good connections between wires with function being connected to function. Next, check for any loose connections or pinched spots. Finally, make sure a required fuse or relay is not blown or missing.

If you are still having trouble after these steps, contact us and we will work on some other troubleshooting options.

I am attaching some articles on troubleshooting and wiring that will assist you.

expert reply by:
0
Brint H

Products Referenced in This Question


Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>