Is there a Center Bushing for Equalizer TREQ1304
Question:
Do you sell the center bushing for these.
asked by: Brandon W
Expert Reply:
The center hole for equalizer # TREQ1304 is 7/8 inches in diameter. The closest match we have to a bushing that will reduce that is # TRBU11568 which has a 7/8 inch outer diameter and 9/16 inch inner diameter. But it is 1-3/4 inches long so it will come up short.
If possible you could just use a 7/8 inch wet bolt, # TRFA71063, provided that the hanger mounting hole is large enough or can be bored out to 7/8 inches safely.
Products Referenced in This Question
Nylon Bushing - 9/16" Inner Diameter, 7/8" Outer Diameter - 1-3/4" Long - Qty 1
- Trailer Leaf Spring Suspension
- Bushings
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- 9/16 Inch ID x 7/8 Inch OD
- 1-3/4 Inch Long
- TruRyde
more information >
Wet Equalizer Bolt with Castle Nut and Grease Zerk - 4-11/16" Long - 7/8" Diameter
- Trailer Leaf Spring Suspension
- Suspension Bolts
- Camper
- Car Hauler
- Utility Trailer
- 7/8 Inch Diameter
- 4-11/16 Inch Long
- TruRyde
more information >
Product Page this Question was Asked From
Equalizer for 2" Wide Slipper Springs - 11" Long - 7/8" Center Hole
- Trailer Leaf Spring Suspension
- Standard Equalizer
- Camper
- Car Hauler
- Utility Trailer
- Slipper Springs - 2 Inch
- 11 Inch Long
- Tandem Axle
- Triple Axle
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 2 5/16 ball
- Shop: Equalizer for 2" Wide Slipper Springs - 11" Long - 7/8" Center Hole
- Shop: Wet Equalizer Bolt with Castle Nut and Grease Zerk - 4-11/16" Long - 7/8" Diameter
- Shop: Equalizer Suspension Bolt with Locknut - 5-1/4" Long
- Video: Redline Tandem Axle Trailer Equalizer Kit Review
- Q&A: Does Trailer Suspension Equalizer TREQ1304 Require Bushings
- Shop: Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long
- Video: TruRyde Trailer Suspension - Leaf Spring Suspension - TREQ1304 Review
- Search Results: trailer suspension
- Q&A: What Torque is Needed for Bolts on Equalizer for 2" Wide Slipper Springs
- Shop: Wet Equalizer Bolt with Castle Nut, Grease Zerk and Cotter Pin - 3-1/2" Long
- Shop: Tandem-Axle Trailer Equalizer Kit for 2" Slipper Springs - 13-1/8" Long Equalizers
- Shop: Dexter Tandem-Axle Trailer Hanger Kit for 3" Slipper Springs - 38" Axle Spacing
- Q&A: Installation Instructions for Equalizer for Slipper Springs
- Video: Redline Trailer Suspension 166078 Review
- Video: Review of Hopkins Wiring - Trailer Connectors - HM48847
- Search Results: equalizer bushings
- Video: TruRyde Trailer Suspension TRBU12566 Review
- Search Results: trailer axles bushings
- Search Results: trailer spring bushings
- Video: Review of Redline Trailer Leaf Spring Suspension - Spring Mounting Hardware - AP216-H238
- Video: TruRyde Trailer Suspension TRBU11508 Review
- Q&A: Does Equalizer for 2" Wide Slipper Springs # TREQ1304 Come with Bushing
- Search Results: equalizer bushing
- Q&A: Availability of Equalizer Bolt, Cotter Pin, and Castle Nut for Tandem-Axle Trailer Hanger Kit
- Q&A: Recommended Bolt Compatible with Center Hanger for 2 Inch Wide Slipper Springs
- Q&A: What is the Torque Rating for an Equalizer Bolt
- Article: Slipper Spring Trailer Suspension System Review
- Search Results: equalizer