Trailer Hitch Recommendation for 2012 Ford Focus for Towing Trailer
Question:
Hi. I have a 2012 for focus that only can have a class I trailer hitch example attached. Are there any products like a carrier towed or lifted that could house a 106 lb moped 2011 tomos - that would work with a class i trailer? Its a weird fit since its heavier than a bike but nowhere near the weight of typical motor cycles. Thank you.
asked by: Jake H
Expert Reply:
I wish we had a carrier solution that I could recommend, but all of the hitches for your 2012 Ford Focus like the Curt # C11158 do not have the capacity for a scooter carrier like you'd need.
Only possible solution would be a trailer for the scooter with the hitch. For trailer wiring you'd want the part # 118549 for if you have a hatchback or part # 118548 for if you have a sedan.
For a ball mount you'd then want the part # 3593 and hitch ball # 19256.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Hitch Receiver Sizes
- Article: Roadmaster Vehicle Specific Base Plates
- Article: Flat Towing Package for 2008-2011 Honda CR-V
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Will Curt T-Connector Fit 2015 Ford Focus ST Hatchback
- Article: What Do I Need To Tow A Trailer?
- Q&A: Trailer Wiring Harness Recommendation for a 2014 Ford Focus ST Hatchback
- Q&A: How Can I Get Additional Trailer Wiring Signals at the Rear of my Durango
- Q&A: How Does Hitch Tongue Weight Rating Affect Use of a Motorcycle Carrier on a Toyota Sienna
- Q&A: Curt Echo Brake Controller for 2023 Jeep Grand Cherokee 4xe
- Q&A: How To Wire Up Hopkins Engager Push-To-Test Trailer Breakaway Kit