Does Air Lift Suspension kit # AL57390 Fit 1999 Ford F-350

Question

Question:

quick question I was on the Air Lift website and they say item number 57390 is what i need for my vehicle But when I am using your website and enter my vehicle item 57390 says not confirmed to fit. so does that mean you guys just havent installed one on my vehicle ?? because im pretty sure if the company says an item fits then it fit right? 99 f350 superduty 4wd in bed hitch Thanks

asked by: Rich

0

Expert Reply:

For your 1999 Ford F-350 Super Duty the Air Lift kit part # AL57390 is listed as a fit on our site and with Air Lift. I double checked to be sure. I attached a picture that shows how this install using L-bracket style fifth wheel rails as well for you to see.

expert reply by: Jameson C

0

click to enlarge

Answer 1

We can help you out and it's definitely smart to check as there's a bunch of different options. I did verify with Air Lift the correct air bags for your '02 F-350 4WD with Curt 5th wheel brackets, and they do use the center bolt shown in…

view full answer...

Answer 2

The Air Lift LoadLifter 5000 Air Helper Springs #AL57390 that fit a 2004 Ford F-250 Super Duty do not have a specified pressure you should inflate the bags to for a load ranging from 6,000 lbs to 8,000 lbs. As you can see by the cut out of the linked…

view full answer...

Answer 3

For a Firestone air suspension kit confirmed as a fit for your 2015 Ford F-250 2WD with a gas engine you would want the part #F2550. This kit will work with the fifth wheel rail kit you ordered and will be installing as well. I attached an install…

view full answer...

Answer 4

The Firestone Ride-Rite Air Helper Springs #F2550 in conjunction with the Reese Quick-Install Custom Brackets #RP50082 should be able to be installed without interference. The mounting brackets for the Firestone Ride-Rite #F2550 attach to inboard…

view full answer...

Answer 5

The Firestone Ride-Rite air bags that fit your 2002 Ford F-350 are the Firestone Ride-Rite Air Helper Springs #F2550, and according to the manufacturer, these ARE compatible with an in-bed hitch, so you can definitely add a 5th wheel hitch to your…

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 7

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 8

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 12

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Does Air Lift Suspension kit # AL57390 Fit 1999 Ford F-350

Product Page this Question was Asked From

Continue Researching