Recommended Weight Distribution System for 9,000 Pound Camper and F-250 with 6 Inch Lift
Question:
I have a 2012 Ford F-250 with a 6inch lift kit and Ill be pulling a 9000 lb camper trailer. I have a 6inch drop hitch what product would you recommend for weight distribution and sway control with the setup that I have?
asked by: Justin B
Expert Reply:
The most important factor to consider when picking out a weight distribution system is the total tongue weight of your towing setup. This number includes both the loaded tongue weight of your trailer, along with any added cargo weight coming from behind the rear axle of your Ford F-250. Many systems include an adjustable shank, or one can simply be added, so that you can tow your trailer level with the 6-inch lift on your truck.
The most accurate method for determining your trailer's loaded tongue weight is with a scale like the etrailer # 99044. In the meantime, though, we can make a quick estimate using the 9,000-pound total trailer weight that you mentioned. If this is its loaded weight, as if its ready to go on a trip, we can estimate that its loaded tongue weight will be around 900 to 1,350 pounds. This is because a trailer's tongue weight should be between 10 to 15 percent of its total weight.
If this ends up being an accurate range (remembering to also add in any added weight coming from the back of your truck), I recommend the Reese Straight-Line Weight Distribution System # RP66130, which has a tongue weight capacity of 800 to 1,500 pounds. This is a great system that will do an excellent job of evenly distributing weight over the axles of your trailer and truck. Its automatically self-adjusting, self-centering sway control will keep your trailer in line while cornering or sudden swerving.
You will just need to add the adjustable shank, l like the Reese # RP3344 that has a maximum drop of up to 7-5/8 inches, along with a compatible hitch ball like the 2-5/16 inch # C40030.
I have attached a short video demonstration on this system that you can take a look at, along with an FAQ on weight distribution systems that you might also find helpful.
Products Referenced in This Question
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 15,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 15000 lbs GTW
- Class IV
- Class V
- CURT
more information >
etrailer Tongue Weight Scale for Campers and Utility Trailers - 2,000-lb Capacity
- Tongue Weight Scale
- Analog Scale
- 2000 lbs
- etrailer
more information >
Product Page this Question was Asked From
Strait-Line Weight Distribution w/ Sway Control - No Shank - Trunnion Bar - 15K GTW, 1,500 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Shank Not Included
- Electric Brake Compatible
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- Allows Backing Up
- 1100 lbs
- 1200 lbs
- 1300 lbs
- 1400 lbs
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Can Blue Ox SwayPro Weight Distribution be Used With Equal-i-zer Weight Distribution Shank
- Q&A: Is There a Trailer End 4-Round With Wires
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Recommended Tongue Weight Capacity for a 2020 Chevrolet Silverado 2500
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Will 18" Long Equal-i-zer Weight Dist Shank Reduce Tongue Weight Capacity
- Q&A: Replacement Trailer Grease Seal for an NOK AD2527E Seal on a Boat Mate Trailer
- Article: How to Install a Weight Distribution Hitch (With Pictures & Video)
- Q&A: Will Reese Weight Distribution System RP66131 Work for Trailer with 1,350 lbs Tongue Weight
- Q&A: Will Lift Bracket RP6637 and Chains 3216 Fit on Pro Series RB3 Weight Distribution System