Will Curt and etrailer Class III Trailer Hitches Fit 2005 Ford Escape With Spare Tire Underneath?
Question:
I have a 05 ford escape limited awd which requires a full sized spare tire underneath. Will this curt 13650 and the etrailer e56AR both fit this particular set-up? Thank you
asked by: Ron C
Expert Reply:
Yes, the Curt # 13650 and etrailer # e56AR will both fit your 2005 Ford Escape that has a spare tire underneath. Please keep in mind that if you already have a factory hitch the Curt # 13650 will not be a fit.
To add a 4-way to power your trailer's lights you need Wiring Harness # 118426; I've added a link to a video review and install of this part for you to take a look at. If you are going to be towing, I recommend checking out Ball Mount Kit # 989900, which may fulfill your towing needs in one tidy package; two ball mounts - one with a 3/4” rise or 2” drop and the other with a 2-3/4” rise or 4” drop - a 1-7/8” hitch ball, a 2” hitch ball, and a pin and clip. You can use the link to the help article on ball mounts I've added to determine if this kit will give you the correct amount of drop or rise. I've also attached a link to our page with each of our ball mounts as well as a video review of the ball mount kit.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Difference Between Curt 13650 and 13651 on 2008 Ford Escape
- Q&A: Adding a 7-Way Trailer Connector on a 2012 Ford Escape to Use Prodigy RF Brake Controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Differences between the Curt Trailer Hitch # C13651 and # 13650 for a Ford Escape
- Q&A: Bolt Fishing Wire for the Installation of a Curt Hitch on a 2006 Ford Escape
- Q&A: Size of Factory Bolts For Installation of Curt Trailer Hitch Receiver in Factory Weldnuts
- Q&A: Happy Jack Extension and Swing Out Brackets for Clearance on a Ford F-450 Cab Chassis w/ Camper
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Q&A: Can a 1-7/8 inch Hitch Ball be Used with a 2 inch Coupler on Trailer
- Article: Determining Trailer Tongue Weight
- Article: How to Measure for Trailer Hitch Drop
- Article: What is Boondocking
- Article: My Trailer Hitch Doesn't Fit