Rebuild Kit for a Kodiak 250 Trailer Brake Caliper
Question:
I have a triple axle trailer with Kodiak 250 calipers. They have been inoperable for three or four years. Is there anything that would prevent them from being usable if I rebuild them? Secondly how do you get the piston out to replace it? Thank you.
asked by: Stacey E
Helpful Expert Reply:
As long as you rebuild the calipers properly and bleed the brakes you'd be good. For a rebuild kit for the Kodiak 250 calipers we have the part # KDBC250KIT.
Using compressed air is still the way to go. I have come across many instances of people using this method to push out the piston. And the best part is, it works. If you do not have an air compressor I am sure a local shop would go ahead and do it for you since it takes only a few seconds.
Product Page this Question was Asked From
Kodiak Disc Brake Caliper Rebuild Kit for 7,000 lb to 8,000-lb Trailer Brakes
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- 7000 lbs
- 8000 lbs
- Caliper Parts
- Rebuild Kit
- Kodiak
more information >
Continue Researching
- Q&A: Replacement Grease Cap and Wheel Studs for a RV Trailer Hub with ALKO Electric Brakes
- Q&A: Recommendation for Towing Trailer with Electric Over Hydraulic Brakes with Four Chevy Silverados
- Q&A: Lug Nut Torque Spec for a 1/2 Stud with Coned Lugs on a 15 in Steel Wheel
- Q&A: Does Dexter Electric Over Hydraulic Actuator Work with Ford Integrated Brake Controllers
- Q&A: Issues Using Chevy Brake Controller On Trailer with Electric Over Hydraulic Brakes
- Q&A: Which is Better Dexter or Hydrastar Electric Over Hydraulic Trailer Brake Actuators
- Q&A: Disc Conversion Using a Kodiak Brake Kit and a Hydrastar EOA Actuator Kit
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Our Team Picked The Best Camping Gear of the Year - Here Are Their Top Choices
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)