Timbren Axle Less Kit Recommendation for 2k Axle with Lift Kit and Jeep Wheel Bolt Pattern
Question:
I have a 2008 Fleetwood Cobalt I want to pull behind my Jeep with the wheels and tires on the trailer to match the Jeeps so I can share spare tires. The campers gross weight should be right around 2,000 lbs. and I would like about 4inch of lift. The camper is equipped with electronic safety brakes with a break-away cable activation. Not sure if I can re-use that mechanism or not? May want to upgrade to actual tow vehicle brakes later. Also, need 5 on 5.5 hubs to match the Jeep. I can get a different bolt pattern and drill out if necessary, as long as the hub face is flat.
asked by: Cameron T
Expert Reply:
We've had this question a few times in the past and we have been told a few times by Jeep owners that the Jeep bolt pattern is 5 on 5 inch which we'd have a solution for with the 2k Axle Less Timbren kit part # ASR2KHDS03 that you are interested.
For a hub and drum that fits that axle kit and has the correct bolt pattern you'd want the part # AKHD-550-35-EZ-K.
For brake assemblies you'd then want the part # 23-468-469.
![Jameson C](https://images.etrailer.com/static/images/catg/people/371_tn.jpg)
Products Referenced in This Question
Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Easy Grease Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 4" Lift - 4 Bolt - 2K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2000 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Recommendation for Converting Fleetwood Neon Pop-Up to Axle-Less Suspension System with Jeep Tires
- Q&A: Can Brakes Be Added to the 2K Timbren Axle-Less Trailer Suspension System
- Q&A: Adding Crossbars To A Teardrop Trailer
- Q&A: Using Wheels From Jeep Wrangler on Tandem Axle Trailer
- Q&A: Timbren Axle-Less System With 2,200 lb Capacity Compatibility With Dexter Brake and Hubs K71-511-00
- Q&A: Can Oil Bath Hubs be Converted to Grease Hubs
- Q&A: Comparing Timbren Axle-Less 2K Trailer Suspension Systems with 4" Lift
- Article: Pintle-Hitches
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Where to Position the Trailer Axle?
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Trailer Lighting Requirements
- Article: How to Measure Your Trailer Wheel Bolt Pattern