BOLT Hitch Lock Recommendation for Keying to Pontiac Car Key

Question

Question:

Will this work on a Pontiac car

asked by: John H

0

Expert Reply:

You'd need a GM based Bolt hitch lock like part # BL7018445 which can key to center cut GM keys like your Pontiac.

I attached a couple pictures that show it's compatibility.

expert reply by: Jameson C

0

click to enlarge

Answer 1

We do indeed offer some hitches that are designed to bolt to the frame of your travel trailer. If the frame members on your travel trailer are between 18-51 inches apart, the Curt Hitch #C13701 would be an excellent choice, with it's tongue…

view full answer...

Answer 2

From the top of the B and W Tow and Stow part #BWTS10043B down to the bottom of the unused ball when it is in it's lowest position measures 14 inches. The 7 inch drop version part #BWTS10040B instead has this distance at 12 inches.

view full answer...

Answer 3

The K-Source Custom Flip Out Towing Mirror - Electric/Heat - Textured Black - Driver Side Item #KS60114C will need to manually be flipped out and the actual glass mirror will be controlled by the mirror button inside of your vehicle. So if you set…

view full answer...

Answer 4

The ideal height will actually have to do with how tall the coupler of the trailer is from the ground. The Draw-Tite #76020 will sit at 13 1/2 inches from the ground to the top of the hitch when installed on a 2016 Mazda CX-9. From what I could find…

view full answer...

Answer 5

The patented Lets Go Aero Anti-Rattle Device for 2-Inch Hitches, part #63232, will work in most aftermarket Class II, III and IV 2-inch hitches. It will not fit some extra-wide factory-installed hitch receviers. Please note that it can only be used…

view full answer...

Answer 6

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 7

The Blue Ox high-low adapter, part #BLU28XR, is 12-3/4" long.

view full answer...

Answer 8

Yes, you can absolutely use an aluminum ball mount with a stainless steel hitch ball without worry of the ball mount corroding. In fact, there are no aluminum hitch balls so manufacturers suggest the use of stainless steel as it is going to be the…

view full answer...

BOLT Hitch Lock Recommendation for Keying to Pontiac Car Key

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching