Can the Winch Mount Plate # C31010 be Used with the Multipurpose Ball Mount # D210
Question:
Hey Jon - awesome. Thanks for the quick reply. Yes - a winch recommendation would be great.... electric probably 2000-3000 lb. would be plenty. Preferably something that fits the mounting holes on the winch plate without more drilling!!! Thanks - really appreciate your help
asked by: Manny
Expert Reply:
Using the Curt Multipurpose Ball Mount # D210 to tow a motorcycle trailer and the Winch Mount Plate # C31010 to pull the motorcycle onto the trailer is a great idea!
The multipurpose ball mount has a Gross Trailer Weight (GTW) rating of 7,500 lbs and a Tongue Weight (TW) rating of 750 lbs. That is a combination of both the ball mount and the 2nd receiver so you will want to make sure that you stay within those weight capacities.
I have attached some review videos for you to check out as well as some photos that give the dimensions of both products that you can use to make sure everything will fit properly.
If you don't already have a winch then just let me know what type you are looking for and I can make a recommendation.
Products Referenced in This Question
Bulldog Winch Trailer Winch - Wire Rope - Hawse Fairlead - 3,400 lbs
- Electric Winch
- Car Trailer Winch
- Trailer Winch
- 3-Stage Planetary Gear
- 2.0 HP
- 2001 - 4000 lbs
- 21 - 30 lbs
- Medium - 5 to 9 fpm
- Plug-In Remote
- Wire Rope
- Bulldog Winch
more information >
Bulldog Winch Wiring Kit for ATV/UTV Winches - 120" Long Power Lead
- Accessories and Parts
- Electric Winch
- Wiring
- Wiring Kits
- 10 Feet Long
- 6 Gauge Wire
- Bulldog Winch
more information >
Curt Trailer Hitch Electric Winch Mount Plate
- Accessories and Parts
- Electric Winch
- Mounting Hardware
- Plates
- Without Handle
- CURT
more information >
Product Page this Question was Asked From
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 0 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Built-In Dual Hitch
- CURT
more information >
Continue Researching
- Shop: Brake Controller
- Shop: Redarc Tow-Pro Liberty Brake Controller - Dash Knob - 1 to 2 Axles - Proportional
- Article: Brake Controller Installation: Starting from Scratch
- Shop: Trailer Hitch
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Winch Wiring Kit Recommendation for Powering Winch at Rear of Vehicle
- Q&A: Receiver Mounted Winch Plate and Wiring Kit for Winch on EZ GO Golf Cart
- Q&A: Can 14/2 Wire be Used to Power Winch from Truck Battery
- Q&A: Wiring and Quick Disconnects for Superwinch LT2000 Electric Utility Winch
- Shop: Bulldog Winch Power Lead Extension for ATV/UTV Winches - 6 Gauge - 12' Long
- Shop: Bulldog Winch Wiring Kit for ATV/UTV Winches - 120" Long Power Lead
- Video: Bulldog Winch Electric Winch BDW20307 Review
- Shop: Bulldog Winch Rear Wiring Kit - Quick Connect to Terminal End - 2 Gauge - 20' Long
- Q&A: Can 12 Volt DC Trailer Hitch Wiring From a 7-Way RV Connector be Used to Power a Winch
- Q&A: Recommended Battery Size for 9000+ lb Recovery Winch
- Shop: Trailer Wiring
- Shop: Van Cargo Mat
- Q&A: Winch Size and Type for a Carson Deluxe Car Hauler with 5 Foot 45 Degree Ramp and 3500 Pound Car
- Search Results: red69fr
- Search Results: winch mount
- Search Results: trailer wheel lock
- Search Results: 4 to 7 adapter
- Search Results: 90 hitch adapter
- Search Results: trailer winch mount
- Search Results: 7 to 4 adapter
- Shop: Bulldog Winch Mounting Hardware - Grade 5 -Truck - 10mm x 30mm - Set of 4
- Shop: Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers
- Shop: B&W Pintle Hook Mounting Plate for 2" Hitches - 11" Shank - 8 Hole - 16,000 lbs
Manny
2/16/2018
Hey Jon - awesome. Thanks for the quick reply. Yes - a winch recommendation would be great.... electric probably 2000-3000 lb. would be plenty. Preferably something that fits the mounting holes on the winch plate without more drilling!!! Thanks - really appreciate your help